tracking pixel
G

Hitchhiker's Guide to the Galaxy Symbol Fridge Magnet

by

Gareth42

Follow
Follow
Remix Model
Like
G
Gareth42
Image 1 of 5
Hitchhiker's Guide to the Galaxy Symbol Fridge Magnet 3d model
2D
3D
Makes
Hitchhiker's Guide to the Galaxy Symbol Fridge Magnet 3d model
Hitchhiker's Guide to the Galaxy Symbol Fridge Magnet 3d model
Hitchhiker's Guide to the Galaxy Symbol Fridge Magnet 3d model
Hitchhiker's Guide to the Galaxy Symbol Fridge Magnet 3d model
Hitchhiker's Guide to the Galaxy Symbol Fridge Magnet 3d model
This model is restricted by licensing terms. 
2 Likes3 DownloadsFebruary 15, 2022
This model is restricted by licensing terms. 


Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4459878.

This uses a ceramic magnet diameter 18mm and height 3mm. Printed in 3D Warhorse blue PLA and a Silk Black PLA of another brand. Used the color change feature of PrusaSlicer to have the print pause at the right layer so I could manually switch the filaments. I printed two: One in blue with a silk black (silver) layer, and one in silk black with a blue layer. The filament should be swapped just before the layer that bridges the gap over the hole for the magnet (3mm) and again just before the layer where the symbol starts (3.6mm). During the first color change, I inserted the magnet into the hole. This is not necessary, because the pert is open on the bottom to insert the magnet, this just insures that the magnet will sit flush inside of the part.


2 Likes3 DownloadsFebruary 15, 2022




This model is restricted by licensing terms. 
2 Likes3 DownloadsFebruary 15, 2022
This model is restricted by licensing terms.