This 86mm by 54mm card can easily slide into your wallet, to give to anyone who is a Karen.

Get F*cked Karen Card

This 86mm by 54mm card can easily slide into your wallet, to give anyone who needs to F off.

The F off Card

A modern soap dish
I used PLA+ for this, but I would recommend something more capable of withstanding heat. PETG, or ASA.

The Modern Soap Dish

Sorta based on a revolver cylinder, this spice rack will hold most 2.5 and 5 OZ shakers.
It holds up to 7 shakers at a time and can be fastened with a drop or two of hot glue, or superglue.

I printed this with a 5% infill, with a .4mm nozzle, but you can use a .8mm nozzle as well to cut down print time.

Supports are not needed for the Rack Face, and Back, but are needed for the Connecting Rod.

You will need to print 3 Connecting Rods.

Revolver Cylinder Spice Rack

Rack Face (2).stl

I designed this to be a loose-fitting cable management device, mountable under a table.

I printed this in PLA, no supports are needed. 

Cable Clip.stl

Captain America Shield Coaster

This was specifically designed to be used for the Raspberry Pi 4 CanaKit case, it allows easy access to the Pi at all times.

Raspberry Pi CanaKit Mount v1

Fallout 4 Logo Coaster

Remember the Enclave Coaster

For the Brotherhood Coaster

- This is version 2, it extends the outer rim of the top section, to encompass the very base of the router, and removes the middle circular section, so it should provide more cooling than version 1.

If you have T-Mobile Internet, then you most likely have this router, and as most of us know most electronics don't function well with being exposed to excessive heat. This router gets very hot and is only passively cooled. This means The router will not function at peak performance so that's why I designed this, a 120mm fan adapter that pushes air up through the router and cools the device.

I saw an almost immediate difference in ping time, download and upload speeds have improved 10-20%, and the router is now cool to the touch, which wasn't the case before.

It's designed in three parts and can be easily printed on most printers, no support is needed, and regular PLA will do the job, as long as you're not planning to put it into direct sunlight, if you are get a better-suited filament for being exposed to sunlight

T-Mobile Trash Can Router 120mm Fan Adapter V2

Topv2.stl

Fallout Coaster

A simple print, that can be printed on most printers. You can store 8-9 cards depending on the design of the card.

A Simple Credit Card Holder

Month Coins for whatever reason.

25mm width 40mm length 3mm depth

Month Coins

1Jan.stl

Day of the Week Coins

20mm wide, 40mm length, 3mm depth

Day of the Week Coins

FriCoin.stl

If you have T-Mobile Internet, then you most likely have this router, and as most of us know most electronics don't function well with being exposed to excessive heat. This router gets very hot and is only passively cooled. This means The router will not function at peak performance so that's why I designed this, a 120mm fan adapter that pushes air up through the router and cools the device.

I saw an almost immediate difference in ping time, download and upload speeds have improved 10-20%, and the router is now cool to the touch, which wasn't the case before.

It's designed in three parts and can be easily printed on most printers, no support is needed, and regular PLA will do the job, as long as you're not planning to put it into direct sunlight, if you are get a better-suited filament for being exposed to sunlight

T-Mobile Trash Can Router 120mm Fan Adapter

Top.stl

Just a flawed creator creating erroneous prints.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Erroneous Prints