.STP shell files for project omnia including whole and split panels.

EC-omnia-shell-STP

EC-omnia-shell-whole.stp

EC-omnia-shell-split-with_nails.stp

EC-omnia-shell-whole-with_nails.stp

.STL print files for project omnia, a high compatibility 3DPPC frame, for more details visit u/EdgeCaseSFF on reddit

**requirements**
- 500g filament
- 50 pcs M3 brass threaded inserts
- assorted M3 countersunk flat-head screws, 8mm for 2.5" drives, 12mm for the brackets, 30mm for the chassis fans etc.

**recommended print settings**
- at least 20% cubic infill
- at least 3 wall line count
- at least 3 top and bottom layers

**misc.**
- part 11 trough 16 are same as part 1 and 2 split into smaller pieces for printer compatibility.
- part 9 and 10 are only needed for 2nd and 3rd HDD pair placement.
- parts are already oriented to be printed without supports.
- parts with x number need to be printed x number of times

EC-omnia-print-files-STL

01-aio_side-bracket-x1.stl

.STP files for project omnia, a high compatibility 3DPPC frame, for more details visit u/EdgeCaseSFF on reddit

- this file includes the frame and all the PC parts with their possible placements.
- exterior enclosure will be made available separately.

EC-omnia-frame+components.stp

.STP files for project omnia, a high compatibility 3DPPC frame, for more details visit u/EdgeCaseSFF on reddit

- this file includes the frame without the PC parts.
- exterior enclosure will be made available separately.

EC-omnia-frame-only.stp

.STP files for project omnia, a high compatibility 3DPPC frame, for more details visit u/EdgeCaseSFF on reddit

- this file includes the frame with the large parts split into smaller pieces for compatibility with smaller printers.
- exterior enclosure will be made available separately.

EC-omnia-frame-split.stp

- part "03-IO-bracket" needs to be printed using supports.
- x number in the name means the part needs to be printed x times

EC-1-print-files-STL

03-IO-bracket-x1.stl

- this model includes the components, extrusions and fasteners, useful for assembly.
- part "03-IO-bracket" needs to be printed using supports.

EC-1-complete-STP.stp

- this model includes the voronoi panel cut-outs.
- part "03-IO-bracket" needs to be printed using supports.

EC-1-voronoi-shell-STP

08-side-panels

05-pillars-lock

01-feet

10-fan-bracket

07-back-panel

12-top-panel

06-front-panel

11-PSU-stopper

04-pillars

02-feet-bracket

03-IO-bracket

09-SSD-bracket

- this model includes blank panels that can be customised with ones own cut-out designs
- part "03-IO-bracket" needs to be printed using supports

EC-1-blank-shell-STP

.STL files for EC-S140, more details on reddit at u/EdgeCaseSFF

EC-S140-STL

S140-voronoi-shell.stl

.STL files for EC-S120, more details on reddit at u/EdgeCaseSFF

EC-S120-STL

S120-voronoi-shell.stl

.STP complete model including voronoi shell, internal frame, fasteners and all the other components.

EC-S140-complete

p-shell

p-frame

p-gpu

p-itx

p-m3-screw

p-m3-insert

p-fan

.STP voronoi shell with panels split in half, for small printers

EC-S140-split-shell

.STP voronoi shell with single piece panels, for large printers

EC-S140-joined-shell

.STP blank shell for cut-outs other than the default voronoi

EC-S140-blank-shell

EC-S120-split-shell

.STP voronoi shell with panels as one piece, for large printers

EC-S120-joined-shell

.STP complete design including the voronoi shell, internal frame, fasteners and all the other components.

EC-S120-complete

.STP blank shell that can be used for cut-out designs other than voronoi

EC-S120-blank-shell

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like