Shower curtain rod holder with 25mm cutout. 

On image (attached) you can see it "installed".  I use wooden bar with 25mm diameter as my rod. I just need to repaint my holders. :)

I cut my wooden bar to size so it has fairly tight fit. Just so it doesn't move around in holders when moving curtain left or right.

And here are dimensions.
Diameter: 40mm
Total thickness: 10mm
Cutout width / diameter: 25,25mm
Cutout depth: 5mm
Backside cutout: 0,75mm (for double sided tape)

Printed with Creality LD-002H (with cracked screen) and SUNLU Black. 

Shower Curtain Rod Holder

shower_curtain_rod_holder.SLDPRT

This is modified version of 3D Model in next link.
https://than.gs/m/448779

You have two options. One with round base and one with square base (with rounded corners).

I made it for Mars 4 DLP cover, which is new printer at work. We are using handle with round base.
Main change is diameter of top part of handle, compared to original. Original had to fit inside of "Holder" and that's why it was smaller in diameter.

This one might be better as simple handle (since is larger), if you don't need holder.

I already printed it with Creality LD-002H (with cracked screen) and SUNLU black 2.58s (normal layer ET). Will post photo soon.

Mars 4 DLP cover Handle

cover_handle_Mars4_krog.SLDPRT

Four different badges for grille. Dimensions are based on Chrysler (300C) original grille badge. Thickness is most likely not the same (not sure).

Dimensions for all badges:
Total thickness 4,5mm
Backside cutout (for two sided tape): 0,5mm
Pockets: 2,5mm

Badge #1 and #2
Middle parts (logo and text) are 1,75mm in height.
Side wall is 2,5mm.

I added photo of badge number 3. It was printed with Creality LD-002H (with cracked screen) and SUNLU Black resin with 2.58s (normal layer ET). You might notice a "crack" in print. ;)
I don't know why 2.58s :) just "testing". In "M" is still some uncured silicon, that's why it looks the way it looks.

I need to replace my badge. I really like #3. I think is "simple" and "bold".

Four Mopar Grille Badges [STL]

Mopar_logo_grille_badge_#3.STL

Four Mopar Grille Badges

Mopar_logo_grille_badge_#3.SLDPRT

.STL and .SLDPRT

I made this cap with knurling for some screws i wanted to screw / unscrew by hand.
After they are printed i simply insert screw and add more resin, to fix it in. You can see it on photos.

Dimensions:
Diameter: 9,5mm
Heigh: 5mm
Pocket depth: 3,5mm
Pocket diameter: 7mm

Printed with Creality LD-002H and SUNLU White with 1.15s (normal layer ET)

Cap for screw with knurling

knurling_cap.SLDPRT

UPDATED: Cover holder is now updated.  I attached screenshot from assembly. It shows that stoppers won't prevent handle to slide in.

Two 3D models for handle and holder (for handle), for Creality LD-002H. But could be used for other resin printers as well.
I uploaded both models with and without holes.


I added two photos of handle attached to cover. I still plan to spray paint it. Holder for handle just finished printing on one of the photos. Will post photo of holder as well.

In the middle of cover (Creality LD-002H) is square with QR sticker. It is visible square when you take the sticker of. So this handle should cover the square in the middle.

Holder size is 50mm x 50mm x 50mm with 10mm thick walls.
Handle size is 41mm x 41mm x 45mm with 30mm wide middle part .

Holes on holder are for flat head M5 screw. I didn't measure hole diameter, just used Solidworks default M5 size.
Same hole on handle, with depth of 15mm.

I will place the holder under the wall shelf, above printer.

I didn't print it yet, but will be printing it with Creality LD-002H.

Handle & Holder for Printer cover [STL]

cover_handle.STL

UPDATED: Fixed cover holder. Cover handle should slide in without problems.

This two 3D models are for handle and holder (for handle), for Creality LD-002H. Of course could be used for others as well.

I added two photos of handle attached to cover. I still plan to spray paint it. And holder for handle just finished printing on one of the photos. Will post photo of holder as well.

In the middle of cover is square with QR sticker. It is visible square when you take the sticker of. So this handle should cover square in the middle.

Holder size is 50mm x 50mm x 50mm with 10mm thick walls.
Handle size is 41mm x 41mm x 45mm with 30mm wide middle part .

Holes on holder are for flat head M5 screw. I didn't measure hole diameter, just used Solidworks default M5 size.
Same hole on handle, with depth of 15mm.

I will place the holder under the wall shelf, above printer.

I didn't print it yet, but will be printing it with Creality LD-002H.

cover_handle

cover_holder

Handle & Holder for 3D Resin printer cover

Handle & Holder for Printer cover

cover_handle.SLDPRT

cover_holder.SLDPRT

3D_printer_cover_handle_holder.SLDASM

Here is 3D model for ceiling light i made for my apartment. I have fairly low ceiling, so i wanted to replace hanging light.

I wanted something as minimalistic as possible, but i also didn't want straight line. 

I attached few images. Attached photos are from "version 1". 
This "new" version is with deeper channel for led strip, cutout (1mmx1mm - visible on profile image) for white cover so you can't see led strip.

Dimensions: 731.49mm X 140.41mm X 18.27mm

Big hole in the middle is for wire from ceiling.
Each section has one hole for screw.
Hole diameter for screw head is 7mm.
Hole diameter for threaded part is 3mm.

I will also upload original files (.SLDPRT) in case you would prefer original. It will also be as parts (8 parts). Since my printer is not big enough, i had to split it.

Printed with Creality LD-002H, with stndard resin.

Ceiling Light - minimalistic design [STL]

Here is 3D model for ceiling light i made for my apartment. I have fairly low ceiling, so i wanted to replace hanging light.

I attached few images. Attached photos are from "version 1". 
This "new" version is with deeper channel for led strip, cutout (1mmx1mm - visible on profile image) for white cover so you can't see led strip.

Dimensions: 731.49mm X 140.41mm X 18.27mm

Big hole in the middle is for wire from ceiling.
Each section has one hole for screw.
Hole diameter for screw head is 7mm.
Hole diameter for threaded part is 3mm.

I will also upload original files (.SLDPRT) in case you would prefer original. It will also be as parts (8 parts). Since my printer is not big enough, i had to split it.

Printed with Creality LD-002H, with stndard resin.

Ceiling Light - minimalistic design

Pinarello "P" keychain with dimensions 55.4mm x 58.9mm and thickness 7mm. Middle part is 4mm thick.

Pinarello "P" keychain

Pinarello_keychain.SLDPRT

5-way splitter for water pump Sicce Multi 2500 or 4000. Can replace original hose connector.

For 6mm inner diameter hose.

Uploaded few photos of printed part.

Printed with Creality LD-002H.

5-way splitter Sicce Multi

5way_spliter_sicce_multi.SLDPRT

Flower ring, with cutout on petals, so you can fill them with resin in different color(s).

Ring was polished to gloss. So all "sharp" edges were rounded a bit.

You should scale it, accordingly. Made for 8 year old.

You can see printed/finished ring on two photos. Pink is very "light". I made one more with darker pink, but i don't have it (it was a gift).

Printed with Creality LD-002H, with standard resin.


Flower ring

flower_ring.SLDPRT

Custom HEMI grille badge. Can replace original Chrysler badge.

On back side is 0,5mm cutout, for double sided tape. I used 1mm thick tape (for 300C badge).

HEMI grille badge

HEMI_grille_badge.SLDPRT

Recommended to print with tough resin, otherwise it might snap off at the top.

Main / middle part is 4mm thick.

Mopar keychain

mopar_keychain.SLDPRT

Guitar pick triangle shape, with dimensions 33mm x 32mm x 2mm.
2mm thickness is flat part of pick (around grip).  Middle (grip part) is 2,5mm.

Diamond shaped middle, for better grip.

Guitar pick triangle - 33 x 32 x 2mm

guitar_pick_triangle.SLDPRT

Butterfly ring, with cutout on wings, so you can fill them with resin in different color.

Ring was polished to gloss. So all "sharp" edges were rounded a bit.

You should scale it, accordingly. Made for 8 year old.

You can see printed/finished ring on two photos. Pink is very "light". I made one more with darker pink, but i don't have it (it was a gift).

Printed with Creality LD-002H, with standard resin.

Butterfly ring

butterfly_ring.SLDPRT

I made this ring for my nieces 8th birthday.

She is fairly skinny and unfortunately ring was a bit too small. Ring is thick, so i just had to grind it out a bit. So with that in mind, you should definitely scale it.

It was printed with white resin. Then i mixed white resin with red color to get pink. Pink resin was used to fill in all hearts. And for nice glossy finish, i polished it.

I left hearts with "sharp" edges, because i knew edges will get rounded/"soft" while polishing.

Printed with Creality LD-002H, with standard resin.

Ring with 8 hearts

ring_with_hearts.SLDPRT

Magic The Gathering deck box, with inside dimensions (closed box) 70mm x 50mm x 92mm.

Feels very "heavy duty".

Printed with Creality LD-002H, with stndard resin (black bottom and white lid).

Magic The Gathering deck box - STL version

MTG_bottom.STL

Magic The Gathering deck box. In assembly it might show tiny interference. But i already printed one and it fits perfectly.

Inside dimensions: 70mm x 50mm x 92mm

Feels very "heavy duty". 

Printed with Creality LD-002H, with stndard resin (black bottom and white lid).


Magic The Gathering deck box - Assembly version

Magic The Gathering deck box. In assembly it might show tiny interference. But i already printed one and it fits perfectly.

Feels very "heavy duty". 

Printed with Creality LD-002H, with stndard resin (black bottom and white lid).


Magic The Gathering deck box

Magic the gathering bottom part

Magic the gathering lid part

Guitar pick with dimensions 32mm x 28mm x 2mm.

So if you download SLDPRT you can edit text, with few clicks.
Included two files without text.

Printed with Creality LD-002H, with tough resin.

Guitar pick - 32 x 28 x 2mm

guitar_pick_with_text.SLDPRT

Guitar pick 32 x 28 x 2mm without text

Chrysler 300C side badge. Original size. 

**_This is updated version._** Previous version was too thin at the back. My badges cracked during winter. **New version thickness is 3mm back and 3mm front.**

On photos you can see (first version) black matte color before "installed" and on car. 

On back side is 0,5mm cutout, for double sided tape. I used 1mm thick tape.

Original side badge can't be used (without modifications) without trim. This one is ready to go in case you removed your trim.

Printed with Creality LD-002H.

Chrysler 300C side badge [UPDATED]

300C_side_badge.SLDPRT

300C_side_badge_v2.STL

Sprayer for hydroponics, for 6mm inner tube hose.

Printed with Creality LD-002H.

Hydro sprayer 6mm inner tube

Sprayer for hydroponics, for 6mm inner tube hose.

sprayer_ver5.STL

5-way splitter for 6mm inner diameter hose.

I also uploaded image with cut / inside view.

I didn't print it yet. But when i do, it will be printed with tough resin.

5-way splitter - 6mm

5way_water_split_ver2.SLDPRT

Custom grille badge for Chrysler 300C. Can replace original badge.

On back side is 0,5mm cutout, for double sided tape. I used 1mm thick tape.

Printed with Creality LD-002H.

Chrysler 300C grille badge

Custom grille badge for Chrysler 300C. Size wise, can replace original badge.

Included are both, STL file and Solidworks part file.

300C_grille_badge.STL

ring_with_hearts.STL

guitar_pick_triangle.STL

Like my username says., i create my 3D models for fun. I create all my models only with Solidworks. So i usually upload both STL and SLDPRT (or SLDPRT with Assembly). If SLDPRT or STL for specific part is not uploaded yet, it will be soon.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

3DforFUN

Pinned models

Magic The Gathering deck box - Assembly version

Ring with 8 hearts

Guitar pick triangle - 33 x 32 x 2mm

Shower Curtain Rod Holder

Mars 4 DLP cover Handle

Four Mopar Grille Badges [STL]

Four Mopar Grille Badges

Cap for screw with knurling

Handle & Holder for Printer cover [STL]

Handle & Holder for Printer cover

Ceiling Light - minimalistic design [STL]

Pinarello "P" keychain

5-way splitter Sicce Multi

Flower ring

HEMI grille badge

Mopar keychain

Guitar pick triangle - 33 x 32 x 2mm

Butterfly ring

Ring with 8 hearts

Magic The Gathering deck box - STL version

Magic The Gathering deck box - Assembly version

Guitar pick - 32 x 28 x 2mm

Chrysler 300C side badge [UPDATED]

Hydro sprayer 6mm inner tube

5-way splitter - 6mm

Chrysler 300C grille badge