It's a wall mount, for a bike.
I guess you could also use this to mount a large dildo or similar cylindrical object.
[Check out the V2 version, which saves even more space!](https://thangs.com/designer/3DFinesse/3d-model/Wall%20Mount%20Bike%20Rack%20V2-971719?manualModelView=true&source=Recent)

Bike Wall Mount

BikeWallMount-Body.step

Will add pictures once I get new versions printed and mounted.
These are a bit shorter, and are intended for taking the front wheel off and hanging it from the front mount, this lowers the profile of the bike against the wall a bit, since the whole point of making these was to make room in my small apartment.
Oh, I also added a soft pad that you can print in something like TPU if you want to protect your bike a bit, although I imagine you you're that worried about protecting your bike, you're probably not 3D printing a wall mount for it.

Wall Mount Bike Rack V2

FrontMount.step

I was tired of dabs dropping of my tool and down the sink, so I used my big genius brain to create this.
This base tip holds a standard one gram container, and the top shaft holds a 2mmX4mm disc magnet to hold the dab tool in place.
It's also shaped like a dick because dicks are funny.

Magnetic Dab Tool Holder and Dab Catcher.

DabToolHolder-Body.step

A sturdy small dish to hold clay ball bearings in when target practice. 
Easy to pick up just one from the bowl.

Simple Shot Scout LT Slingshot pictured.

Slingshot Dish

Slingshot_Dish.step

I have provided the Fusion 360 file, which includes parameters for ring size, thickness, height, and fillet.

This ring is suitable for use with any yoga mat, gym mat, or foam roller.

YOGA GYM ROLL MAT RING HOLDER PARAMETRIC CUSTOMISABLE

YogaMatRing.step

I created this to prevent my Lansky Puck Sharpener from scratching other items in my bag.

Fusion 360 file included.

Designed for this Lansky puck sharpener: https://amzn.to/3StcnGT

Lansky Puck Sharpener Box

My wife wanted a Christmas ornament that looked like a Stanley Travel Mug. I couldn't find any models, so I made this one in Tinkercad.

Stanley Travel Mug.stl

Stuffed animal brace.stp

A reusable bottle cap for beer bottles. With grip. Designed for **german beer bottles**. I dont know if it fits to beer bottles in other countries.
Strong enough to lift the bottle by the grip. Tho I dont recommend to swing the bottle ;-)
Good to close the bottle while sitting outside to stop entering insects or dust to enter. 
Use **TPU** or other flexible materials. Tested with TPU. 


Bottle cap with grip.stl

Surf Hardware Fin.stl

Pocket comb so small you can carry it inside a napkin.

The size is 2" left-right, 3 cm top-bottom, 3mm width. Yes, that's one object measured using 3 units of both imperial and metric.

Designed for 0.4 mm nozzle. Printing this correctly will prevent the nozzle from moving side way between teeth of the comb. Moving like that will create a web of plastic which render the comb useless, or require a lot of post processing to clean that up.

The comb teeth are as fine as 0.4 mm nozzle allow without significant risk of elephant foot merging them up.

Attached images show the size. Printed with white PETG. Yes, my bird can help me comb my hair :3

If you want pattern on the comb, like shown in the image, set TOP layer to 0 and infill to have the pattern you want. For mine, I use Cross infill in CURA. You can also use BASE layer 0 to make the pattern through the grip itself.

Want something change, feel free to contact

Mini Fine Comb

miniComb.3mf

It's a pain to try to use a coach's whistle that's on a lanyard around your neck if you're wearing hockey gloves. So I made a holder for the whistle that, along with the strap of your choice, will attach it to your glove.

Two versions, one mounted straight, the other at an angle.

**Use TPU or another flexible material.**

I had these straps already: https://www.amazon.com/gp/product/B07J4P7WBD. The length of the slots for these straps is 36mm. You can adjust the Y on yours to make the length fit whatever straps you have.

If your strap doesn't have velcro like the one above, you can consider printing out one of @rorys3d's Robust Buckles: https://www.printables.com/model/281536-robust-buckles

Specs for examples in pics:

Zyltech Black TPU (Shore hardness: 95A)
.24mm layer height
4 outer walls
Inside to Outside wall ordering
5% infill (pattern doesn't matter)
 

Included 3mf file was used in Cura, not PrusaSlicer. Printing the angled one took 23 minutes on an Ender 3 S1 with a SonicPad.

This is the whistle in the photo: https://www.walmart.com/ip/American-Whistle-Corporation-American-Classic-Whistle-Black/908743265

Health & Fitness

Categories

Remixes

Personalize

Trending

Popular

Makes

New Uploads

Downloads