A reusable bottle cap for beer bottles. With grip. Designed for **german beer bottles**. I dont know if it fits to beer bottles in other countries.
Strong enough to lift the bottle by the grip. Tho I dont recommend to swing the bottle ;-)
Good to close the bottle while sitting outside to stop entering insects or dust to enter. 
Use **TPU** or other flexible materials. Tested with TPU. 


Bottle cap with grip.stl

Surf Hardware Fin.stl

Will add pictures once I get new versions printed and mounted.
These are a bit shorter, and are intended for taking the front wheel off and hanging it from the front mount, this lowers the profile of the bike against the wall a bit, since the whole point of making these was to make room in my small apartment.
Oh, I also added a soft pad that you can print in something like TPU if you want to protect your bike a bit, although I imagine you you're that worried about protecting your bike, you're probably not 3D printing a wall mount for it.

Wall Mount Bike Rack V2

FrontMount.step

Lock designed for a treadmill, uses original bolts, original pin and spring. Reinforced to prevent breaking like original one did.

trademilllock.stl

Stuffed animal brace.stp

This is the ultimate golf holder in which you can store balls and tees. The holder only works for specific tees. I also designed a hook in which you can attach to the holder and clip it on your golf bag.

Ultimate golf holder

Golf holder.stl

My wife wanted a Christmas ornament that looked like a Stanley Travel Mug. I couldn't find any models, so I made this one in Tinkercad.

Stanley Travel Mug.stl

It's a wall mount, for a bike.
I guess you could also use this to mount a large dildo or similar cylindrical object.
[Check out the V2 version, which saves even more space!](https://thangs.com/designer/3DFinesse/3d-model/Wall%20Mount%20Bike%20Rack%20V2-971719?manualModelView=true&source=Recent)

Bike Wall Mount

BikeWallMount-Body.step

I was tired of dabs dropping of my tool and down the sink, so I used my big genius brain to create this.
This base tip holds a standard one gram container, and the top shaft holds a 2mmX4mm disc magnet to hold the dab tool in place.
It's also shaped like a dick because dicks are funny.

Magnetic Dab Tool Holder and Dab Catcher.

DabToolHolder-Body.step

Pocket comb so small you can carry it inside a napkin.

The size is 2" left-right, 3 cm top-bottom, 3mm width. Yes, that's one object measured using 3 units of both imperial and metric.

Designed for 0.4 mm nozzle. Printing this correctly will prevent the nozzle from moving side way between teeth of the comb. Moving like that will create a web of plastic which render the comb useless, or require a lot of post processing to clean that up.

The comb teeth are as fine as 0.4 mm nozzle allow without significant risk of elephant foot merging them up.

Attached images show the size. Printed with white PETG. Yes, my bird can help me comb my hair :3

If you want pattern on the comb, like shown in the image, set TOP layer to 0 and infill to have the pattern you want. For mine, I use Cross infill in CURA. You can also use BASE layer 0 to make the pattern through the grip itself.

Want something change, feel free to contact

Mini Fine Comb

miniComb.3mf

It's a pain to try to use a coach's whistle that's on a lanyard around your neck if you're wearing hockey gloves. So I made a holder for the whistle that, along with the strap of your choice, will attach it to your glove.

Two versions, one mounted straight, the other at an angle.

**Use TPU or another flexible material.**

I had these straps already: https://www.amazon.com/gp/product/B07J4P7WBD. The length of the slots for these straps is 36mm. You can adjust the Y on yours to make the length fit whatever straps you have.

If your strap doesn't have velcro like the one above, you can consider printing out one of @rorys3d's Robust Buckles: https://www.printables.com/model/281536-robust-buckles

Specs for examples in pics:

Zyltech Black TPU (Shore hardness: 95A)
.24mm layer height
4 outer walls
Inside to Outside wall ordering
5% infill (pattern doesn't matter)
 

Included 3mf file was used in Cura, not PrusaSlicer. Printing the angled one took 23 minutes on an Ender 3 S1 with a SonicPad.

This is the whistle in the photo: https://www.walmart.com/ip/American-Whistle-Corporation-American-Classic-Whistle-Black/908743265

Hockey & Lacrosse Glove Whistle Holder

Hockey Glove Whistle Holder v3_cura.3mf

Explore a high-quality 3D model from Mels3D on Th

lattice bin

lattice bin exp.stl

3D scan of ping pong paddle. GLB model from Polycam scan. 

poly.glb

A quick print to allow you to turn 2 x Soda (Pop) bottle caps into a small pill box for if you want or need to take some back up medication with you.

also allows for some fun home recycling and customization by selecting the Bottle Cap of your choice

I hope this is useful, and that you enjoy.

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

Soda Pill Box

Discover our 3D health and fitness model of the sleek Makeup Box Skin Care Storage perfect for organizing your cosmetic products. This detailed and realistic model, rendered using high-resolution textures, mirrors the functionality and aesthetics of a real-life makeup storage case. Experience the impeccable design and structure of this 3D model, ideal for interior design, virtual staging, and simulation applications. Ideal for beauty enthusiasts, makeup professionals, or 3D designers in the health & wellness sector, this model helps promote organization, cleanliness, and ultimate convenience. Explore this Makeup Box Skin Care Storage 3D model at Thangs.com. Using our platform, you'll experience an efficient 3D visualization along with the ability to interact in real time, rotate, scale, and dissect the model in detail. Dive into the world of 3D modeling with Thangs.com and our 3D model of a Makeup Box Skin Care Storage today.

Makeup Box Skin Care Storage

Upgrade your bathroom with the addition of a unique and functional 3D model, created by Maker Millwright, now available on Thangs.com. Introducing a toothbrush holder designed to encompass both health and fitness and aesthetic appeal. The geometry-inspired design paired with a vivacious purple shade is designed to be visually appealing and promote cleanliness. 

Extraordinarily crafted to showcase elegance, practicality, and uniqueness, this 3D printed toothbrush holder guarantees a clutter-free bathroom environment. Its precise stopper slot ensures your toothbrush stays upright and hygienic. Further enhancing its appeal is the use of PETG, a widely recognized material known for its durability, water-resistance, and recyclability - making it a perfect choice for 3D printed household items.

Don't let its elegant appearance fool you - this toothbrush holder is a breeze to make! It has been designed to be 3D printed without supports, making it ideal for both beginners or experienced 3D printing enthusiasts alike. 

Not just a simple toothbrush holder, it’s a unique piece of art designed by a creative artist who believes in crafting items that merge functionality and style seamlessly.

Join the tribe of innovative thinkers and bring this geometrical masterpiece into your bathroom today. Enjoy this impactful combination of health, fitness and modern design provided by the Maker Millwright at Thangs.com. Stay fit, stay healthy, and keep your toothbrush clean with this 3D printed toothbrush holder – crafted exclusively for lifestyle enthusiasts like you.

FHW Toothbrush holder with stopper slot

Heloo Tribe,
I wanted a new toothbrush holder and I wanted it to be geometric and purple so I made one for all of us to enjoy. I even designed it to be used without supports and in PETG.
Please enjoy

CHeers
Maker Millwright

For flat dog collars up to 25mm (1 inch) wide. 

NOTE: This version has a small slit in the loop to allow it to be used on collars which have clips on both ends. 

A version with a full loop (ie. without the split) that is suited for collars with a flat end is also available. 



AirTag Dog Collar Holder (SPLIT version)

AirTag Holder SPLIT v3.step

---

📝 Description

---

Football fan? Soccer Mom? These amazing headbands will show your team spirit at your next game.  No multicolor printer?  Just a few filament swaps and you can achieve the same results, the design uses layer heights to identify color changes.  

&nbsp;

---

🖨️ Printing Tips

---
Print in place, no assembly.
These easily paint for your AMS or other slicer for coloring.  Layers assist those without color printers, filament swaps work as well to get the multicolor look. 
Use a .2 layer height to maximize the color layers.
&nbsp;

---

🔗 Additional Information

---

Scale the X/Y Axis (do not scale Z) equally to get different sizes, no other adjustments need to be made. 
The one in the photo is 100% size which is a bit tight on a adult. 

Child Size - 100%
Toddler Size - 80%
Adult Size - Female - 115%
Adult Size - Male - 120%-150% 

When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.

&nbsp;

---

⚖️ License

---

**Free For Personal Use - Commercial Restricted License (with subscription)** 🟠

🔄 *Attribution* | 💼 *Free for Personal Use * | * Resale with Thangs Subscription*

&nbsp;

---

👥 Community

---

🌟 *Adore this model? Show some love to Rob, the one-man creative force behind Makers Mashup, and dive into more maker adventures!* 🌟

🎥 **Watch & Subscribe on [YouTube](https://youtube.com/MakersMashup?sub_confirmation=1)** - Assembly videos, tutorials, and much more. Don't miss out on new content!

🔗 **Join the Creative Journey on [Thangs.com](https://www.thangs.com)** - Follow me for the latest models and exclusive content.

🤝 **Engage with the [Community Discord](https://discord.gg/ZDKq5N2)** - Get help and advice from a large and vibrant community. Build anything with the support of fellow makers!

📲 **Get Social with Makers Mashup** - 🐦 [Twitter](https://twitter.com/MakersMashup) | 📸 [Instagram](https://www.instagram.com/makers_mashup/) | 👍 [Facebook](https://www.facebook.com/MakersMashup) - See work in progress, prints, and more.

❤️ **Support the Channel & Creator** - Your support makes a difference!
   - 🤝 [Patreon](https://www.patreon.com/makersmashup) – Support my ongoing work and get access to exclusive content!
   - 💸 Drop a tip: [Ko-fi](https://koji.to/k/8E9J)
   - 🛍️ Shop on Amazon? Click [this link](https://amzn.to/429HusI) before your next purchase. It helps the channel at no extra cost to you!

🔓 **Unlock Incredible Benefits**
   _with a Paid Subscription on [Thangs.com](https://www.thangs.com), or Select Tiers on [YouTube](https://youtube.com/MakersMashup?sub_confirmation=1) or [Patreon](https://www.patreon.com/makersmashup)_

   - Resale Abilities
   - Early Access to Models
   - Request New Models
   - Exclusive Discord Channel for Supporters with Behind-the-Scenes Content

🚀 *Let’s build, share, and grow together!* 🚀








Football (Soccer) Headband

---

📝 Description

---

Football fan? Soccer Mom? These amazing headbands will show your team spirit at your next game.  No multicolor printer?  Just a few filament swaps and you can achieve the same results, the design uses layer heights to identify color changes.  

&nbsp;

---

🖨️ Printing Tips

---
Print in place, no assembly.
These easily paint for your AMS or other slicer for coloring.  Layers assist those without color printers, filament swaps work as well to get the multicolor look. 
Use a .2 layer height to maximize the color layers.
&nbsp;

---

🔗 Additional Information

---

Scale the X/Y Axis (do not scale Z) equally to get different sizes, no other adjustments need to be made. 
The one in the photo is 100% size which is a bit tight on a adult. 

Child Size - 100%
Toddler Size - 80%
Adult Size - Female - 115%
Adult Size - Male - 120%-150% 

&nbsp;

---

⚖️ License

---

**Free For Personal Use - Commercial Restricted License (with subscription)** 🟠

🔄 *Attribution* | 💼 *Free for Personal Use * | * Resale with Thangs Subscription*

&nbsp;

---

👥 Community

---

🌟 *Adore this model? Show some love to Rob, the one-man creative force behind Makers Mashup, and dive into more maker adventures!* 🌟

🎥 **Watch & Subscribe on [YouTube](https://youtube.com/MakersMashup?sub_confirmation=1)** - Assembly videos, tutorials, and much more. Don't miss out on new content!

🔗 **Join the Creative Journey on [Thangs.com](https://www.thangs.com)** - Follow me for the latest models and exclusive content.

🤝 **Engage with the [Community Discord](https://discord.gg/ZDKq5N2)** - Get help and advice from a large and vibrant community. Build anything with the support of fellow makers!

📲 **Get Social with Makers Mashup** - 🐦 [Twitter](https://twitter.com/MakersMashup) | 📸 [Instagram](https://www.instagram.com/makers_mashup/) | 👍 [Facebook](https://www.facebook.com/MakersMashup) - See work in progress, prints, and more.

❤️ **Support the Channel & Creator** - Your support makes a difference!
   - 🤝 [Patreon](https://www.patreon.com/makersmashup) – Support my ongoing work and get access to exclusive content!
   - 💸 Drop a tip: [Ko-fi](https://koji.to/k/8E9J)
   - 🛍️ Shop on Amazon? Click [this link](https://amzn.to/429HusI) before your next purchase. It helps the channel at no extra cost to you!

🔓 **Unlock Incredible Benefits**
   _with a Paid Subscription on [Thangs.com](https://www.thangs.com), or Select Tiers on [YouTube](https://youtube.com/MakersMashup?sub_confirmation=1) or [Patreon](https://www.patreon.com/makersmashup)_

   - Resale Abilities
   - Early Access to Models
   - Request New Models
   - Exclusive Discord Channel for Supporters with Behind-the-Scenes Content

🚀 *Let’s build, share, and grow together!* 🚀








This baseball stadium is based loosely off a 1950s Ebbets Field. I've been a little creative, but it's generally very similar. This baseball stadium is haunted though, by the ghost of Mr. Johnson, who found a peanut under his seat. And he's haunted the stadium ever since!

Haunted Baseball Stadium

stadiumGroundFloor.stl

Rough and ready addition to the PGA Tour branded 'Swing Weight & Training Grip Club' to attach an Meta Quest 2 controller.

The bezel/slider and 2x clips will need 4 small nut and bolts (m2 x 6) to assemble, then slipped onto the club and tightened (I used micropore tape to improve grip). The controller and grip part sit together with friction fit, which is safeguarded by wrapping cord around shaft when in place.

Its performance is pretty good after custom calibration in Golf+. With the weights, my club speed is reduced such that carry is about 80% of regular, but is a good workout. With weights off it's a little too light, but I might make a custom weight holder to compensate. 

Created because the one I bought off the shelf broke, and was always putting too much tension into controller through straps (straps could be added to this one, but friction fit current works fine, and I may opt to add some more micropore tape to improve fit if it degrades).

It was also an exercise in learning OnShape as a 3D modelling tool.  This is the explanation for the dodgy results - but they work so hey..

Credit to the original grip goes to 'griff_ivko2'.

[Feel free to further hack it here](https://cad.onshape.com/documents/30327ed4234a0bad4f40c8b3/w/bac1b594fb32fd30facc7c2c/e/86089f8e3b75efa776bb1920?renderMode=0&uiState=653281429f769f424aee02f2) (OnShape is quite good albeit far more complex/featured than tinkercad)


Health & Fitness

Categories

New Uploads

Personalize

Trending

Popular

Makes