Based on my original small Rugged Desktop Organizer, now biggie sized and GRIDFINITY COMPATIBLE 2x3!

**Includes Bambu Studio single and 2 color .3mf files.**

Rugged Organizer LARGE Gridfinity 2x3

Rugged_Organizer_LG_Gridfinity2x3.stl

Based on my original small Rugged Desktop Organizer, now biggie sized with flat bottom. 
 Also available in a [GRIDFINITY COMPATIBLE 2x3](https://thangs.com/designer/K2_Kevin/3d-model/Rugged%20Organizer%20LARGE%20Gridfinity%202x3-959955?manualModelView=true&source=All+Files)!

Includes Bambu Studio single and 2 color .3mf project files.

**♫ ♫ Ohhh, won’t you print this one tonight!  Ohhh, you’re gonna like this one just right. Ohhh, you gonna let your tools hang out!  Flat Bottom Organizers,  make the missing parts be found! ♫**


Rugged Organizer LARGE Flat Bottom

Rugged_Organizer_LG_FlatBottom.stl

This model is part of a set of three finial-style ornaments featuring different patterns. These models are designed for resin printing.

See here for video: https://youtu.be/dPhxaIuhyDE

Download the set:
Knit: https://than.gs/m/971254 
Weave: https://than.gs/m/971263 
Wicker: https://than.gs/m/971265 



Textile Finial Ornament - Wicker

Textile Finial Ornament - Wicker.stl

Three unique gravity-field vases designed to print in “Vase” or “Spiralized” mode.

The models look great with multicolour filament. Models shown are printed with Sovol PLA Silk Magic “Blue, Yellow & Fuchsia.” 

See here for video: https://youtu.be/c0jJhr3cqrM 

See here for similar models:
Stinkhorn Vases: https://than.gs/m/912791 
Wrinkled Vases: https://than.gs/m/956613

AI generated description:


Gravity Vases

Gravity Vase 150mm 1.stl

These panels are designed to be printed in “vase” or “spiralized” mode to minimize the amount of material needed, decrease print time, and give a smooth clean finish. They could be used as sound diffusion panels, decorations, or just to show off your new gradient filament!

See here for video: https://youtu.be/xNsjm7yOsQY 

Square Hilbert Panel: https://than.gs/m/960851 
Rounded Hilbert Panel: https://than.gs/m/960857 

This download includes two sizes of panels with 100mm or 200mm edge lengths. There are two mirrored versions of each panel. See here to learn more about the Hilbert Curve and how to properly orient the tiles: https://en.wikipedia.org/wiki/Hilbert_curve 

Be sure to print in “vase” or “spiralized” mode! The base is 0.5mm thick. I recommend adjusting your settings so that the base prints in only two layers.

When printed with a 0.5mm nozzle as described above, the 100mm and 200mm panels use only 28g and 111g of filament respectively.

These panels work better as sound diffusion panels due to taller features and sharper angles. The “Minimal Height” panels below don’t work as well as sound diffusion panels but use less material.

Minimal Height:
Square Hilbert Panel: https://than.gs/m/957250 
Rounded Hilbert Panel: https://than.gs/m/957254 
Video: https://youtu.be/Gunky5qSwpc

More panel designs:
Topology Tiles - Hex: https://than.gs/m/955066 
Topology Tiles - Square: https://than.gs/m/955067 

Models shown are printed with Sovol Rainbow Candy PLA


Rounded Hilbert Panels - Full Height

Rounded Hilbert Panel - Full Height 200mm 1.stl

Square Hilbert Panels - Full Height

Square Hilbert Panel - Full Height 200mm 1.stl.stl

Simple toothpaste squeezer to help get that last bit of toothpaste out of the tube.  I've personally printed a couple for around the house.  I've even had one get warped after going through the clothes dryer but it still gets the job done.  They're simple and work great!

**Printing Tips**
No supports necessary and under an hour print time!  I printed using marble PLA on the Prusa i3 MK3.  

Please like it if you do and leave any comments!  If you're really feeling generous please consider **[buying me a coffee](https://www.paypal.com/donate/?business=9MATZX4ESRAB6&no_recurring=0&item_name=Help+me+to+continue+designing+and+creating+3D+models+for+you+all+with+some+spare+change+for+coffee+%3A%29&currency_code=USD)** so I can keep creating!

Check out my [TikTok](https://www.tiktok.com/@gcv3d)!

Check out my [YouTube](https://www.youtube.com/channel/UC5bZDx5pKcU-l8q12rkAs9w)!

If you like what you see, please consider joining my [Patreon](https://www.patreon.com/GCV3D).

Toothpaste Squeezer

Toothpaste Squeezer_v2.stl

**Hexagons are the Bestagons!**

Add a little more Accent to your Voron 0.2 build with this Hex covered Mid Panel replacement! You can also add some functionality as this has a Chamber Thermistor mount near the print level of the machine (optional files). Along with brand logo versions for LDO Motors & Fysetc to fit your build.

NO Multi-Color Hardware Required! Just pause at .6mm & 2.2mm and swap colors!

Heavily inspired by the design by Zen3D, but entirely made from scratch. See the original here: https://www.teamfdm.com/files/file/152-v0-midpanel-hexpattern/

Note: Should fit Voron 0.1, but was designed with 0.2 Z-Chain location in mind.

---------------------------------------------------------------
**Parts Needed (Affiliate Links):**
- [NTC100K Thermistor](https://amzn.to/3TbACcW)
- [Polymaker Filament](https://tinyurl.com/Polymakerr)
- [M3 Hardware](https://amzn.to/46QsdyL)
---------------------------------------------------------------
 **Files Included:**
- Hex Mid Panel STEP File
- Hex Mid Panel STL
- Hex Mid Panel LDO STL
- Hex Mid Panel Fysetc STL
- Hex Mid Panel w/ Thermistor Port STL
- Hex Mid Panel Therm. LDO STL
- Hex Mid Panel Therm. Fysetc STL

---------------------------------------------------------------
**Recommended Print Settings:**
- 4 Perimeters
- 40% Infill
- No Supports Required (Hexes should Bridge fine without supports.)
- ABS or ASA Filament recommended.
- Pause at .6mm Layer Height & Swap to Accent Color
- Pause again at 2.2mm Layer Height & Swap to Base Color

---------------------------------------------------------------
Want to Support what I do? Check out my social medias please!

**Link Tree:** http://www.MandicReally.com/links

---------------------------------------------------------------

Design covered by GPL3 Open Source License.

Please consider support on Patreon today: [https://www.Patreon.com/MandicReally](https://www.Patreon.com/MandicReally)

Voron Hex Mid Panel - Accent your 0.2!

Hex_Mid_Panel_(a)_V2.step

Hex_Mid_Fysetc_(a)_V2.stl

Hex_Mid_Panel_(a)_V2.stl

Hex_Mid_Thermistor_(a)_V2.stl

Hex_Mid_Thermistor_Fysetc_(a)_V2.stl

An oversized Squirtle Pokemon card, and completely 3D printed, and print in place! This is another Hueforge hybrid print that uses filament painting methods and traditional 3D printing to create a combined pop-art effect piece. 

 
This uses 5 different filament colours, with blue repeated for Squirtle at the end of the print. If you do not have an AMS, no fear! Just download the 3MF file and instead of a filament change, insert a pause at the correct layer heights and manually load and unload the filament spool yourself before resuming the print. 

 
If you only have one AMS, take out a spool that has finished printing and replace it with colour #5 (when black has finished printing, take it out and put yellow in that slot instead). Remember to set the AMS slot accordingly in your slicer beforehand. 

 
It is large, at **170mm x 240mm in size**. If you have to resize it to fit your printer bed, please only scale the X and Y dimensions, but **do not alter the Z dimension**, otherwise the layer swaps will be inaccurate. 

 
If you are using the Makerworld One-Click printing, all settings will have been applied to this print, and you can just hit Print. If you do not want to use that, please download the 3MF file, or the ** STL (for non Bambu users)** and apply the recommended settings below.

 
**Print Instructions:**
For the HueForge part of the print (0mm - 2.04mm):
- Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

For the Squirtle part of the model (2.12mm - 35mm):
- Print at 5% infill (I used rectilinear), 3 walls, 3 tops, and 3 bottoms.
- Using a layer height modifier, modify the layer height for this range to 0.16mm so that the print goes faster.
- No supports are required

**Filaments Used:**
- PLA Kingroon Black Transmission Distance: 0.4
- PLA BambuLab Basic BambuLab Green Transmission Distance: 8
- PLA META Sunlu Teal Transmission Distance: 5.4
- PLA Kingroon White Transmission Distance: 8
- PLA CC3D Lemon Yellow Transmission Distance: 8

 

**Swap Instructions:**
- Start with Black
- At 0.84mm swap to BambuLab Green
- At 1.32mm swap to Teal
- At 1.56mm swap to White
- At 1.80mm swap to Yellow
- At 2.12mm swap to Teal (for Squirtle)

    

**Post Processing:**
I painted Squirtle by hand, using paint pens.

This model used the Squirtle from [here](https://www.thingiverse.com/thing:2198510) by [rhinodk](https://www.thingiverse.com/rhinodk). If you visit the page, there are plenty of different other Squirtle models for you to download!

 ____________________________________
**Commercial License to Sell a Physical Print of this Model**
If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my [Patreon](https://patreon.com/cyanidesugar3DP?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=creatorshare_creator&utm_content=join_link)! 
____________________________________

Oversized Squirtle Pokemon Card - Hueforge Hybrid

SquirtleFinalLarge.stl

Here's an oversized Charmander Pokemon card, completely 3D printed, and print in place! This is another Hueforge hybrid print that uses filament painting methods and traditional 3D printing to create a combined pop-art effect piece. 

 

This took 5 hours on my Bambu Lab P1P, using 4 different filament colours with orange repeated for Charmander at the end of the print. If you do not have an AMS, no fear! Just download the 3MF file and instead of a filament change, insert a pause at the correct layer heights and manually load and unload the filament spool yourself before resuming the print. 

 

It is large, at **170mm x 240mm in size**. If you have to resize it to fit your printer bed, please only scale the X and Y dimensions, but do not alter the Z dimension, otherwise the layer swaps will be inaccurate. 

 

If you are using Bambu studio, all settings will have been applied to the 3MF file, and you can just hit slice and print. If you do not want to use that, please download the 3MF file, or the STL and apply the recommended settings below.

 
**Print Instructions:** 

1. The Hueforge portion of the print (0mm - 2.48mm) should be printed at 100% infill, at a 0.08mm layer height with 0.2mm base.
2. The Charmander (and it's tail) portion of the print (from 2.52mm to 165mm height) should be printed at 5% infill with 3 walls, 3 top and 3 bottom surfaces and at 0.16mm layer height. You can use a layer height modifier to set these settings or edit the per-object settings.
 

**Filaments Used:**
- PLA Kingroon Black Transmission Distance: 0.4
- PLA CC3D Orange Transmission Distance: 7.4
- PLA CC3D  Lemon Yellow Transmission Distance: 8
- PLA Kingroon White Transmission Distance: 8

 

**Swap Instructions:**
- Start with Black
- At 1.08mm swap to Orange
- At 1.64mm swap to Lemon Yellow
- At 1.96mm swap to White
- At 2.52mm swap to Orange (for the Charmander!)

**Post Processing:**

You'll need to paint Charmander's eyes and body yourself (I didn't, I got lazy), but that shouldn't take too much time! I suggest using a paint pen if you're finding it hard to use paint brushes!

The Charmander STL itself was obtained from [here](https://www.thingiverse.com/thing:826836), uploaded by user [ClassyGoat](https://www.thingiverse.com/ClassyGoat).

Oversized Charmander Pokemon Card - Hueforge Hybrid

Charmander.3mf

Here's a fun mini ball that works at the top of large trees or anywhere on a small tree. You can scale it up as much as you want. There's a lot of detail in the model.

I printed the main ball upside down so it would get good bed adhesion. I've since printed similar ornaments right side up and they worked well, too. I recommend using grid supports for the ball and 1 perimeter to keep it light. 

You'll need some infill for the ball, but not much. I only added 2 layers of infill just above where two arms meet. I used rectilinear infill at 30% I've included my PrusaSlicer 3mf files and GCODE for my Prusa MK3S+, which takes a lot of the work out for you. I know you can do the same thing with Cura. If you use a different slicer that doesn't let you add infill in only certain places, check to see which would add more weight - infill everywhere or adding enough perimeters to not need the infill. You probably only need 2 perimeters total and a decent top/bottom setting to avoid infill. 

I printed the cap right side up with 2 perimeters and organic supports. 

Mini Christmas Ball - Medium Lattice

Mini Christmas Ball Medium Lattice.stl

Low poly rendition of the Piranha Plant from Mario!

**Printing Tips**
I printed using MH Build silk rainbow PLA on the Prusa i3 MK3S.  If you're re-slicing, make sure to add supports as needed.  I selected supports “Everywhere” but then used support enforcers to disable supports in some areas that don't really need them, such as the underside of the planter and inside the mouth.

Please like it if you do and leave any comments!  If you're really feeling generous please consider **[buying me a coffee](https://www.paypal.com/donate/?business=9MATZX4ESRAB6&no_recurring=0&item_name=Help+me+to+continue+designing+and+creating+3D+models+for+you+all+with+some+spare+change+for+coffee+%3A%29&currency_code=USD)** so I can keep creating!

Check out my **[TikTok](https://www.tiktok.com/@gcv3d)**!

Check out my **[YouTube](https://www.youtube.com/channel/UC5bZDx5pKcU-l8q12rkAs9w)**!

If you like what you see, please consider joining my **[Patreon](https://www.patreon.com/GCV3D)**.

Note: Mario is a registered trademark of Nintendo so this model is not permitted for commercial use. 

Low Poly Piranha Plant (Mario)

Piranha Plant Low Poly_v3.stl

Replacement battery cover for Xbox Series X/S controllers.  It may also fit Xbox One controllers but has not been tested.  I printed using PLA on the Prusa i3 MK3 and couldn't be happier with the results!

After testing the first version, which is as close to an exact replica to the original part as possible, I found that the printed part lacked the textured feel of the original.  So, I made a second version with some texture on the top surface to help slide the cover on and off.  I also use a rechargeable battery docking station, so, of course, I made a third version with a cutout for charging the batteries.

I couldn't stop there, so I also made a selection of custom logo versions with options like Avengers, Overwatch, Witcher, and more!  If you're interested in any other custom logos, just give me a shout!

**Printing Tips**
The model comes with a “wall” surrounding the part to help with stability as it prints, so make sure that the print is oriented with the open ends of the rectangular "wall" pointing vertically.

I also highly recommend the following slicer settings to help with a clean print and ease of support removal:

- 0.2mm layer height
- Outer and inner brim - you decide the width but I used 4mm and it worked well
- Support material: everywhere, grid style, XY separation of 100% (i.e. same as nozzle diameter), increase pattern spacing (4mm spacing worked well for me)

Please like it if you do and leave any comments!  If you're really feeling generous please consider **[buying me a coffee](https://www.paypal.com/donate/?business=9MATZX4ESRAB6&no_recurring=0&item_name=Help+me+to+continue+designing+and+creating+3D+models+for+you+all+with+some+spare+change+for+coffee+%3A%29&currency_code=USD)** so I can keep creating!

Check out my [TikTok](https://www.tiktok.com/@gcv3d)!

Check out my [YouTube](https://www.youtube.com/channel/UC5bZDx5pKcU-l8q12rkAs9w)!

If you like what you see, please consider joining my [Patreon](https://www.patreon.com/GCV3D).

Xbox Series Controller Battery Cover

Xbox Series Controller Battery Cover_Witcher.stl

Here's a fun mini ball that works at the top of large trees or anywhere on a small tree. It's the first in a series of small Christmas ornaments. You can scale it up as much as you want. There's a lot of detail in the model.

I printed the main ball upside down so it would get good bed adhesion. I've since printed similar ornaments right side up and they worked well, too. No infill is needed. I recommend using grid supports for the ball and 2 perimeters. You may be able to print it with just 1 perimeter if you want to make it lighter.

I printed the cap right side up with 2 perimeters and organic supports. 

I've included my PrusaSlicer 3mf files and GCODE for my Prusa MK3S+.

Mini Christmas Ball with Straight Arms

Mini Christmas Ball Straight.stl

This honeycomb vase can serve as a great decorative vase or pencil holder.  It is designed to be scalable and printed in vase mode, so if you resize the model just make sure you're printing in vase mode.

**Printing Tips**
No supports necessary since you're printing in vase mode!  I printed using silk rainbow PLA on the Prusa i3 MK3.

You can resize the model in your slicer and the vase mode setting will take care of the rest.

Please like it if you do and leave any comments!  If you're really feeling generous please consider **[buying me a coffee](https://www.paypal.com/donate/?business=9MATZX4ESRAB6&no_recurring=0&item_name=Help+me+to+continue+designing+and+creating+3D+models+for+you+all+with+some+spare+change+for+coffee+%3A%29&currency_code=USD)** so I can keep creating!

Check out my [TikTok](https://www.tiktok.com/@gcv3d)!

Check out my [YouTube](https://www.youtube.com/channel/UC5bZDx5pKcU-l8q12rkAs9w)!

If you like what you see, please consider joining my [Patreon](https://www.patreon.com/GCV3D).

Honeycomb Vase (vase mode)

After a hard night's work guiding Santa Claus and the other reindeer through a foggy Christmas Eve, Rudolph takes a nice relaxing soak in a hot tub, drinking a refreshing holiday peppermint martini.

Hot Tub Rudolph is a singular print design which can be displayed on a shelf (FDM) or strung on a pine tree (SLA). Let this happy-go-lucky legend reassure kids all over the globe that he will deliver Santa Claus to their homes on Christmas Eve.

If this print peaks your interest, head on over to my Facebook page to view additional pictures and my other 3D designs and prints: https://www.facebook.com/ScenestruckArt

If there are any problems with the print, please let me know. Constructive feedback is always welcome.

**Notes:**

FDM tested (Ender 3 V2 Neo) and SLA tested (Creality LD-002R). Sliced through Cura 5.3 and Lychee 5.2.2.

The SLA model has a ring on the back of the head to attach a hook for ornament hanging. The FDM model is a centerpiece build, not to be used as a tree ornament.

FDM settings:

Print Temp: 205 C
Bed Temp: 60 C
Layer height:0.16mm
Infill: 5 - 15%
Supports: yes (tree supports work)
Speed: 50-55 mm/s
Filament: Creality Rainbow PLA

SLA Settings:

Layer Height: 0.035 mm
Light-Off Delay: 1 sec.
Exposure Time: 7 sec
Lift Distance: 5 mm
Lift Speed: 50 mm/m
Retract Speed: 150 mm/m
Resin: Creality UV Sensitive Blue

Hot Tub Rudolph

SLA_Hot Tub Rudolph.stl

Build and customize your own gingerbread man bobble with this set of prints, just in time for the holiday season!  This gingerbread man is designed to work with [3D Printy's](https://www.printables.com/model/224836-emoji-printer-bobbleheads/files) bobble-head springs and comes with a set of prints for custom decorations, including the following:
- Gumdrop eyes (or buttons)
- Frosting smile / frown mouth
- Frosting “neutral” mouth
- Dapper jacket (my personal favorite)
- Rolled-up shorts
- Patterned shirt
- Suspender pants and shirt

Click [here](https://www.tiktok.com/@gcv3d/video/7171587649197641003) for a video of the final result in action!

**Printing Tips**
I printed using PLA on the Prusa i3 MK3 with a bunch of different colors at 0.15mm layer height with a 0.4mm nozzle.  I recommend slowing down print speed to help everything come out clean since some of the parts are quite small.  Also, be careful when removing support material as some parts can be delicate.

To assemble, just use a little super glue to attach the eyes, mouth, and clothing.  The spring can be press-inserted and if it doesn't fit initially I recommend just filing or sanding down the spring peg a little bit until it snaps into place.

Please like it if you do and leave any comments!  If you're really feeling generous please consider **[buying me a coffee](https://www.paypal.com/donate/?business=9MATZX4ESRAB6&no_recurring=0&item_name=Help+me+to+continue+designing+and+creating+3D+models+for+you+all+with+some+spare+change+for+coffee+%3A%29&currency_code=USD)** so I can keep creating!

Check out my **[TikTok](https://www.tiktok.com/@gcv3d)**!

Check out my **[YouTube](https://www.youtube.com/channel/UC5bZDx5pKcU-l8q12rkAs9w)**!

If you like what you see, please consider joining my **[Patreon](https://www.patreon.com/GCV3D)**.

BYO Gingerbread Man Bobble

Gingerbread Man - Body.stl

Simple little phone stand as seen on my TikTok!

COMMERCIAL LICENSE - With your active support to Rytek through this Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared. 
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires. 

Recommended Printing settings - 
Print it on its side
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 15%
Infill Pattern: Gyroid
Supports: NO
Brim: No
Raft: N0
Skirt: No


Phone Wedge

RTK-PhoneWedge1.stl

I liked the original tool holder  from TIMBERA 
https://cults3d.com/en/3d-model/tool/creality-k1-max-toolholder-remix
but wanted Gridfinity compatibility.

Creality K1 max tool holder Gridfinity 2x4

K1 max tool holder_.stl

I bought the Pittsburgh nut driver set with overmoulded handles from Harbor Freight and found that only the ones with the uncomfy resin handles had a gridfinity option. I initially printed this with walls, but they ended up breaking off when I handled the container, so I just removed them.

Fits both metric and SAE, recommended to only print out of PLA (Tried ABS and this print warped so hard it peeled the steel sheet off the magnetic bed on my voron). Gluing down some pretty paper is optional, but recommended.

Links to products this was designed to fit:
[SAE/Imperial Set](https://www.harborfreight.com/hollow-shaft-sae-nut-driver-set-7-piece-69239.html)
[Metric Set](https://www.harborfreight.com/hollow-shaft-metric-nut-driver-set-7-piece-69238.html)

3D Printers

Categories

Remixes

Personalize

Trending

Popular

Makes

New Uploads

Downloads