This 3MF file includes: Taller Wavy Table Lamp

Print Settings for Lamp Base: * Settings are for 0.8mm nozzle. You can use a regular 0.4mm nozzle with adjusted settings.

• 1 wall
• 0% infill
• 0.6mm layer height
• 1.2mm layer width
• 15 mm/s initial layer
• 20 mm/s wall speed
• 3.5 hour print time
• approx 330g
• Turn off slow down for overhangs

Print Settings for Attachments: * 0.4mm nozzle ideal

• 3 walls
• 0.2mm layer height
• 0.42mm layer width
• 5-10% infill
• Print slow for best quality
• 15mm/s initial layer
• 40 mm/s wall speed

You will require superglue to join the parts together. The table lamp will have a base cap, and a top cap. No glue is required to attach the lamp shade attachments.

This lamp is designed to fit a IKEA Strala lamp cable.