This general-use pocket is approximately 100mm wide, 40mm deep and 100mm high. It is suitable for pens, glasses, or anything else that fits in it and you want to keep handy.

This pocket is similar too but larger than the original pocket posted here… https://than.gs/m/1256849

This pocket snaps onto the ClampDock (download separately), allowing you to attach it to a wide range of furniture edges.

This download contains the ClampDock Accessory only. You must download the ClampDock separately.

100% printed, no hardware, fasteners or adhesives are required.

Print Settings

For the best results, I suggest the following: Material = PLA / PETG Nozzle = 0.4mm Layer Height = 0.2mm Line Width = 0.4mm Wall Count = 4 (1.6mm) Top and Bottom Layer Count = 5 Detect Thin Walls = ON Wall Generator = Arachne Infill = 40% (Cubic) Brim = Should not be needed Support = No Print orientation = As per the STL/3MF files.

Related Links

The ClampDock is available here… https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs: https://www.logicalplanet.com/

Revisions and Updates I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.