This is a print in place, on fabric model. It requires a build plate size of 235 x 250, but 256x256 is preferred. There is a 3mf file to use that has my settings, or you can load in particular STL Fles that you prefer and adjust the settings yourself. Please refer to the 3D Printing on fabric guide for reference.

Update - 7/15/25 - A new model has been uploaded that can be printed as a privacy screen. There is a text block that can be modified, and a PDF guide that you can follow to do so. Update - 7/16/25 - A new 3mf file has been uploaded, in addition to 3 new stl files with the Marriott/Dragoncon Carpet inspired textile.

This file is printed at a .24mm layer height with a .4mm nozzle. It requires 1 piece of mesh fabric to be places after the pause command at layer 2, held down by magnets. It also uses 4 @ 60mm x 10mm x 3mm bar magnets. These are not necessary but aid in security. I like using a little bit of super glue to ensure the magnets aren't attracted to the hotend. There is a clasp that will hold the clutch firmly in place. To open, apply a small amount of pressure on the side with the indentation in it to relieve some pressure from the closure.

You can further customize this clutch by using the STL files that are meant for adding in your own textile using the included negative modifier. Please refer to the 3D printed magnetic snap clutch instructional guide for more info.

If you have any questions, please don't hesitate to email me at Kaizen3DPrints@gmail.com