Rocket Ship Phone Stand

This cute little rocket ship phone stand uses a Gear Mechanism to put the FUN in functional. This stand looks good on a shelf, is compatible with Keychains, and even gives you something to fidget with when your phone's dead! What's more fun than a Rocket Ship shaped Phone Stand!?*(answer at the bottom)

Complete with:

• Easy Assembly!
• Files for multi material, and single material printing.
• Option for Keychain use

Print Guide:

• Use M3x15mm Screws if you want high durability, otherwise print pins
• Minimum 3 walls, with 25%+ cubic infill. More if you're going to sit on it, less if you're going to Space.
• Use ABS/PETG because you will leave this in a hot car. PLA if you will only use indoors.
• Pre-oriented, with supports needed on just the tip.

Assembly: For each Screw/Pin hole, put a drop or two of super glue in first for a permanent fit.

1. Screw/Pin Middle Gear on to Rocket Tip
2. Screw or Pin the 3x rocket bodies to the Tip. (Make sure Pins are pushed in all the way.)
3. Super glue Windows on Rocket Bodies
4. (if printed separately) super glue Fins on Rocket Bodies

Works great with an iPhone. You probably need one anyways.

*A phone shaped Rocket Ship Stand!