Eve, desk vase/pot planter.
521 downloads · 1 year ago · Designed by us, 3D printed by you.
This is Eve, a desk pot planter.
A PDF with 3D printing settings
Designed by us, 3D printed by you. This is Eve, a desk pot planter. A PDF with 3D printing settings is included.
Eve, desk vase/pot planter.
521 downloads · 1 year ago in  andÂ
Fairy Leaf Pen Holder Planter Desk Organizer STL | Whimsical Cottagecore Office Decor
Minimalist ambient indoor vase, Decorative Desk Planter - Vase mode
Whimsical Rabbit Planter – Sculptural Bunny Succulent Pot & Desk Organizer
Medieval Castle Planter – 3D Printable Fantasy Castle Pot and Desk Organizer
Hedgehog Succulent Planter STL | Woodland Animal Plant Pot | Cute Desk Decor 3D Print
Low Poly Turtle Planter – 3D Printable Succulent Pot and Desk Decor
Chameleon Succulent Planter & Pen Holder
%2520(1).png&w=3840&q=75)
Dragon Head Planter – 3D Printable Fantasy Plant Pot and Desk Decor
Sculptural Wizard Pen Holder - Fantasy Desk Organizer & Stationery Cup
SpiderMan Venom Vase 3MF | Comics Multi-Color | Desk Vase
Work Study Desk Organizer, Minimalist Pen Pot, Modern Pencil Holder, Organized Desktop | Vase Mode
.jpg&w=3840&q=75)
Dragon Skull Planter – 3D Printable Gothic Plant Pot and Fantasy Home Decor
Pikachu cactus
.png&w=3840&q=75)
Mario Cactus Container - Single Color
.png&w=3840&q=75)
Ghost Cactus - Single Color
Death Star Planter / Pen Holder
Grandmillennial Barn Owl & Oak Branch Pencil Cup
Abstract Face Planters Set – Modern Sculptural Vases
POKEMON PSYDUCK POT / PLANTER
Hello, the designs are very beautiful, but there are problems with the printing where the vase starts to curve. A few people have written to you, but there is no complete solution. We paid for the designs and are waiting for a solution from you. I received two prints made with the printing settings you recommended, but unfortunately, both were ruined.
I appreciate this and all of your models, but is there any chance you could start using right-handed threading instead of left? It's very confusing to most of my buyers and i really don't want to have to start putting stickers on everything to show them how to screw/unscrew things.
Got it!
I dont know if anyone will experience the same issues or if its just me but there are a few things that didnt print right for me. Dont use auto tree supports. The overhang needs just a little extra support for clean lines. Also dont use the reccomended 12% infill for the connecter. I shouldve thought of that but im sonewhat new at this. And as a side comment. It's strange but the twist direction is left to tighten. Which is a very strange choice as its always the other way around.
that's actually helpful what settings did you use for the connecter? the bottom isn't screwing in for me no matter how i print it (also tried twisting opposite way)
I used 50% infill printed without supports and now its pretty sturdy.
Sorry for the late reaction. I had to twist it a few good minutes. You. Might want to lightly sand it to wear out the profile a little. After that it screws very easily. New issue i am experiencing is that after a while the driptray doesnt drip anymore.
Hi Kathy, is it too tight?
i am also having trouble with the bottom not screwing. ive tried different filament and settings and its the same problem. Your settings would be great to know please
Posted my settings. For me screwing in the bottom part and unscrewing a few times wore it down enough to where it now works easily. I did print all the parts at 90 percent because of buildheight limits so.
yes it is to tight, they don't connect well at all I'm struggling to get the base of this print to work
Hi! What filament do you use here? Thanks!
Hi! Rock marble PLA from ESUN
hello Printing in Bambu P1S. same problem with printing vase. when it is starting to curve. a lot of overhangs. i print at 0.16 mm Any help would be appreciated Thanks
You should share the 3MF file and/or the settings used in the model, so users can use the same configuration or adjust it according to the information provided to avoid problems and wasted prints. It would be much better, just like many model designers do.
I managed to fix by changing to 0.16 layer height
Did you use supports during the print, and what speed did you use?
Good morning Lee, I am terribly sorry for the delayed response. Based on your picture I would have move the position of the seams, as well as slowing down the printing speed by 20%. I am glad to hear you managed to fix the issue. Please inform me if you need anything else.
Please explain more about moving the seam, do you mean randomise or cjhange the full position
Hi!!!, Facing issue while using Sprial mode as mentioned earlier, only outer shell of the pot is being printed can you please share proper settings used, the pdf with model is not enough, if you could add a screen recording that would be helpfull!!!