A stylized horned eye mask. The lightweight shape follows the natural face curve, making it suitable for cosplay, masquerade looks, photoshoots, or themed costumes. Prints as a single solid piece.

This mask is designed to be worn with ribbon, elastic straps, or a headband attachment. Ideal for demonic themes, fantasy characters, gothic costumes, or dramatic fashion styling.

📏 Measuring Instructions (Compact — Caliper Method)

Measure face width with a caliper: From the outer edge of one eye socket → across the bridge of the nose → to the outer edge of the other eye socket. This is Your Face Span.

Measure the inside mask width in your slicer: Check the inner distance behind the eye openings (not the outer edge — wall thickness affects fit).

Scale the model: Scale uniformly until: Inner Mask Width = Your Face Span

Optional shaping: Slight heat forming with a hairdryer / low heat gun can fine-tune cheek or nose fit.

🖨️ Printing Tips

Prints well in PLA, PLA+, and PETG.

Layer height: 0.12–0.20 mm depending on detail preference.

Supports required under the horn overhangs.

Print orientation: face side down for clean eye edges.

Use a brim for stability if printing tall horns.

🎨 Finishing & Painting Tips

Prime to reveal sculpted swirls and ridges.

Dry brush metallics or contrasting tones to highlight raised patterns.

Gloss coat emphasizes demonic, polished horn effects.

Matte coat gives a more worn, gothic look.