It's a simple bowl in the form of a leaf. no support needed to print, using only little amount of filament. this is useful to store and organized candies in the living room or anything that fits into it. download will included the part that used to create silicone mold if you want to cast this design using resin or plaster. put some removable glue or double tape in the bottom of the printed model, put in it's place at the molding house, pouring silicone, take out the master model from casted silicone, re-assembly printed housing with the casted silicone, now you can pouring the plaster or resin from the hole in the bottom part of the housing. Thank You!

• default size are fit to be print with bambulab A1 mini, it's safe to scale up to larger size.

Print Setting (main model) :

0.4 Nozzle 0.16 layer height 10% gyroid sparse infill 3 wall loops No Support Single color

Print Setting (silicone mold housing) :

0.4 Nozzle 0.2 layer height 5% gyroid sparse infill 2 wall loops No Support Single color