RuvenBals14K followers

Jacobs Ladder Fidget Toy video thumbnail

Jacobs Ladder Fidget Toy

908 downloads · 1 year ago · Hey, that was inspired by this hinge: [https://www.thingiverse.com/thing:4678800](https://www.thing

This model is restricted by licensing terms.

View license.

Description

Hey, that was inspired by this hinge: https://www.thingiverse.com/thing:4678800. Its a 3D printable Version of a very old Toy.

This is a Print in place. You print everything preassembled at once.

The Multicolor version 1 is shown in the Pictures in white and red. Multicolor version 2 is shown in the Pictures in violet and white.

Print Settings: Standard. No supports needed. Also, no brim needed.

Sometimes it needs to be worn in a little before it becomes very smooth. If yours gets stuck frequently try another Filament. Smooth Filaments work the best, like, for example, silk PLA. This model has overhangs and hates PETG.

Technical Data: Small Version: Prints in roughly 2:20 hours. Takes roughly 70g of filament.

Big Version: (Shown in the Pictures and named "Bambu Version") Prints in 2:44 hours. Takes roughly 80g of Filament.

Have Fun!

Tags:

Community Makes (4)

I love this design! This one was the second time i tried to print with a different filament, because the first time it didn't worked smoothly. This filament is silk. Worked better than the first time, still not 100% smooth

Printed on the Prusa MK3.5 in Proto Pasta Nebula PLA

Community Makes (4)

Discussions

Coco3D1 year ago

I love this design! This one was the second time i tried to print with a different filament, because the first time it didn't worked smoothly. This filament is silk. Worked better than the first time, still not 100% smooth

PrinterBambu Lab X1

MaterialPLA

Layer height20 mm

Infill density15 %

SupportsNone

sliverbaer2 years ago

Printed on the Prusa MK3.5 in Proto Pasta Nebula PLA

sliverbaer2 years ago

Man, Thangs really butchered my .gif, lol

YT Short: https://youtube.com/shorts/by3XMZV_78E?si=8U_y9Poo_vdU1cGl

3D_PrintExplorer1 year ago

Amolen Blue/Green/Orange

PrinterBambu Lab X1

MaterialPLA

sem_1561 year ago

PrinterBambu Lab P1S

MaterialPLA

Layer height0.2 mm

Infill density10 %

SupportsNone

Brick_Prototype2 years ago

Loving it! Any way we can get an open hinge at the ends that can be connected to make a really long one? I want to make one that is 500 cm.

RuvenBals2 years ago

I'm working on a modular version ;)

Dianefurlong5 months ago

sorry if its a silly question!! what is the difference with all the different available files, apart from some being multi colours, I have a Bambu printer and some do not print properly, it seems to be stuck at one end