Stem is a modern, minimal planter designed to fit standard nursery pots — no repotting required. It features an integrated twist-off drip tray to catch excess water and help keep surfaces clean.

Dimensions Inside diameter: approx. 4.875" (124 mm) Depth: approx. 5" (127 mm)

Orientation Planter: Print flat side down on the build plate. Drip tray: Print flat side down on the build plate.

**Print Settings **0.2 mm layer height 15% grid infill 2 walls (or perimeters) No supports needed

Filament Example shown: Bambu Lab Matte Dark Green PLA Designed for PLA, but other common filaments may also work depending on your printer settings.

Recommended for indoor use only and away from direct sunlight. Not dishwasher safe. To clean, simply wipe with a damp cloth.