⚔️ Cyber Oni-Samurai 13 – Dummy 13 Custom Figurine

A cybernetic Oni warrior brought to life!
This figurine is built on the Dummy 13 platform, scaled up to 150% to better capture the intricate details of the face, horns, and armor.

The design is split into 4 plates, making it easier to manage the build, mix materials, and customize your colors.

---

🧩 Plates & Print Setup

Plate 1 – Frame

• 🔧 Best printed in PETG (recommended for joints).
• ABS/ASA works best for long-term durability.
• PLA is not recommended (stiff, brittle, and creeps under stress), though it can work if it’s all you have.
• ⚠️ Expect tighter joints, possible snapping, and loosening over time if you go with PLA.

(Frame material recommendations adapted from @soozafone’s original Dummy 13 v1.0 post.)

---

Plate 2 – Head Armor

• 🎨 Printed with PLA (AMS multi-color setup).
• Easier to swap AMS filaments than to paint the head (though painting works too).
• Recommended Settings:
  • Layer Height: 0.12 mm
  • Supports: Tree Supports Slim
• Be gentle removing supports from the hair – proper calibration will give you a clean result.
• ✅ I ran a full calibration and maintenance pass before printing the head, highly recommended.

---

Plate 3 – Armor

• Printed in PLA.
• Designed for multi-color printing – most parts are separated for easy AMS swaps.
• ⚠️ Chest piece is not separated (too late in the design to redo).
• Supports: Tree Supports Slim are required.

---

Plate 4 – Sword & Sheath

• Printed in PLA.
• Simple weapon accessory to complete the Oni-Samurai aesthetic.

---

🎨 Filament Recommendations

Armor parts:

• Works with PLA, PETG, or ASA.

Frame parts:

• Best with ABS/ASA, PETG also works.
• PLA is possible, but expect issues with joints over time.

---

⚔️ Final Notes

• Platform scaled up to 150% for better detail.
• Total: 4 plates.
• Color scheme is flexible – swap filaments in AMS or remix your palette.

---

🧵 Recommended Filaments (Affiliate Links)

If you’d like to try the filaments I use and support my work, here are affiliate links (I may earn a small commission at no extra cost to you):

PLA Filaments

• Overture PLA
• Polymaker PLA
• Anycubic PLA

PETG Filaments

• Overture PETG
• Elegoo Rapid PETG
• Anycubic PETG

---