Hutch

find the worm magnets here - Worm magnets find the Mushroom clickers here - Mushy clickers

• 3 walls, 15% gyroid or 3D honeycomb infill, no supports

• Hutch tested down to 80%

• To recolor the parts within this pack within the 3MF use the fill tool, and toggle the "smart fill angle" to color just the parts desired.

Book Magnet

• I used 5x2 magnets (5x3 will fit too), I buy them from amazon.CA. You can find them here - Amazon Magnets

• The magnet holes are hidden within the body of the book and you will need to pause the printer in order to place them into the holes. If you do not have a magnetic print bed don't use the magnet version

• Please note I've included a pause into the 3mf which will make the printer pause when it is time to insert the magnets. The pause will only show up when in preview mode. You will need to open the 3MF as a project for it to work. If your slice isn't showing the pause, you will need to add one manually (Layer 21 for 0.2 layer height setting)

⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐
 + + 📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available on my profile page - Click here📌