Gazzaladra18K followers

Tissue box tiramisu

552 downloads · 10 months ago · **A sweet box for your tissues.** The design is carefully optimized to produce very little waste wh

This model is restricted by licensing terms.

View license.

Description

A sweet box for your tissues.

The design is carefully optimized to produce very little waste when printed in multi-color! Single and multi-color printing models are included as STL and 3MF! They work with all current and usual multi color setups.

Size The inner dimensions are 231 x 121 x 71 mm. This is a standard tissue box size. If your box is too big, you can simply remove them from the paper box by opening it from the side and putting them inside the design. This way even bigger tissues fit, and you can use a tall box as a refill container!

Instructions

Print all parts
Insert the connectors into the ring (optional)
Glue the ring onto the lid
Insert your box and place the lid on top
Enjoy!

Print settings Required build volume: 256 x 256 x 100 mm Material usage multi-color: 460g model and 50g poop

Material: PLA Print direction: files are rotated correctly Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Infill: 15% Build plate adhesion type: none

Tags:

Community Makes (1)

Such a cool design! Thanks so much for this :)
You are very clever!
My 6yo thought it was a real cake from a distance and thought he was getting cake for breakfast haha.

I printed it straight from the file with no changes.
It did shift slightly off centre to the side during the print. You might be able to spot it in the middle layer of cream.
Not sure what happened there as the print itself was still well adhered to the plate at the end and the printer wasn't opened at all during the print but it still looks awesome and everyone loves it.
I’ll try printing again in a few days and see if it happens then. Any advice in the meantime is definitely welcome.

Community Makes (1)

Discussions

spring22710 months ago

Such a cool design! Thanks so much for this :) You are very clever! My 6yo thought it was a real cake from a distance and thought he was getting cake for breakfast haha. I printed it straight from the file with no changes. It did shift slightly off centre to the side during the print. You might be able to spot it in the middle layer of cream. Not sure what happened there as the print itself was still well adhered to the plate at the end and the printer wasn't opened at all during the print but it still looks awesome and everyone loves it. I’ll try printing again in a few days and see if it happens then. Any advice in the meantime is definitely welcome.

PrinterBambu Lab X1

Print bed sizeX: 26 mm; Y: 26 mm

MaterialPLA

Gazzaladra10 months ago

That looks exactly like my print! Love it! And yes the slight shift might occured when the plate is cooling down. It is the only way to print this part so I hope this small line is okay?

pozett6 months ago

Hey Johannes, do you list the used filament colors for your prints somewhere?

Gazzaladra6 months ago

It's all just Polymaker! I pretty much only use their Panchroma matt PLA. In this case peanut, cotton white and earth brown

pozett6 months ago

Thank you :)