A self-watering planter with a water level indicator. You can refill it by either watering the plant directly, the top or side opening. If you want to reduce the water level or clean the saucer you can drain it easily with the provided sprout. The planter can be placed aside on the flat inner part or left be left on top. The indicator has 4 cuts for ¼ of the maximum each. You can print it in single or multi color. The open sprout makes sure that there is air flow to prevent root rot.

Instructions

• Print all parts
• Screw the insert into the pot
• Place drainage material in the bottom of the pot
• Fill it up with soil
• Plant your plant
• Place the indicator in the tray
• Place the pot on the tray
• Water it through the plant for the first time and drain the tray water. Repeat 1-5 times until the water in the tray comes out somewhat clean
• Make sure to clean the tray out from time to time to ensure the heath of your plant Enjoy!

Size assembled:100 x 100 x 100 mm plus the sprout. The tray is 30 mm high.

Print settings Required build volume: 120 x 120 x 100 mm Material usage: 180 g

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Infill: 10% Build plate adhesion type: none