A castle inspired planter with water drainage via the moat.

Scaling / size

• Upscaling (100% +): as big as you want
• Regular size (100%): 153 x 157 x 102 mm with a inner size of ca 96x96x90mm and a wall thickness/small feature diameter of 2mm minimum
• Downscaling (99% – 61%): works great Minimum size (60%): 62 x 65 x 61 mm with a inner size of ca 58x58x54mm and a wall thickness/small feature diameter of 1.2mm minimum
• Everything smaller than that is not tested but maybe possible :D

Print settings Material usage (100% scale): 200g Print time: 16h (100% scale): 16h

Material usage (60% scale): 50g Print time: 16h (60% scale): 5h

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, callibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.