This set of three unique mushrooms features a stochastic Voronoi infill lattice with inserts for 1/8” by 1/8” cylindrical neodymium magnet. A 3mmx3mm cylindrical magnet will also work but may need a dab of glue to secure.

See here for video: https://youtu.be/Zj9uAsy1CM0

This set includes three unique models, “Straight,” “Curve A” and “Curve B.” The mushrooms are approximately 20mm tall.

I recommend press fitting the magnets in place with a pair of channel lock pliers, no glue needed. See video for demo. If you find that the fit is too tight, you can widen the hole slightly with a 1/8” drill bit, or scale the model up very slightly.

This design is sponsored by Resins3D. Models shown are printed on an Elegoo Saturn 2 with Phrozen Dental Study white resin.

See here for other sizes: Large: https://than.gs/m/863807 Small: https://than.gs/m/863815