A spikey little cactus container for your spikey little cactus!

See here for video: https://youtu.be/FG99xDI6KgU

1. For dual color printing, import the model into your slicer and assign your extruders to your selected materials. For single color printing, import and merge the models together in your slicer.
2. Select “User Specified” Z Seam Position and enter coordinates for the center of the model. This ensures that the thorns start printing inside the cactus and not out in midair.
3. For dual color printing, you will not need a prime tower; the extra bumps just add to the effect.
4. The thorn geometry is 0.4mm high. I suggest a layer height of 0.2mm.
5. To get the best thorns with your dual color prints, lower the speed of your thorn extruder and increase the flow rate. The model printing in the video shows the thorns printing at 10mm/sec at 300% flow rate.

See here for a similarly designed but much more disgusting “Zit Vase”: Video: https://youtu.be/C6m6XKhYqII Small: https://than.gs/m/903479 Medium: https://than.gs/m/903481 Large: https://than.gs/m/903483