R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue)

by

Follow

Follow

Remix Model

Social

Become a member

2D

3D

Makes

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) - Really nice model. Got the orientation of a piece wrong, bit hard to tell which way they go, otherwise no complaints. The inside could be used as a hidden storage compartment if it more hollow above the bottom piece. - 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) - Thanks for sharing! - 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) - My boy love them . Any chance you could add an R5D4 head ? The body is the same as R2D2 - 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) - Fun model! Printed in Polymaker PolyLite White, Sliceworx Silk Silver and Royal Blue, and little bit of Prusament Lipstick Red and some generic black. Bottom screw was really tight (even with lube and pliars), reprinted it at 99%. - 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) - Fun model! Printed in Polymaker PolyLite White, Sliceworx Silk Silver and Royal Blue, and little bit of Prusament Lipstick Red and some generic black. - 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) - Fun model! Printed in Polymaker PolyLite White, Sliceworx Silk Silver and Royal Blue, and little bit of Prusament Lipstick Red and some generic black. - 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) - Moc pěkný model - 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) - Made a Variation of the soon to be released R2-KT - 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) - Printed in Polymaker Polylite PLA Pro Black and White, and Polylight Silver. The screw in bottom piece had to be scaled down to 99% X and Y to get it to fit, as it was too tight otherwise. - 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) - Love this one. - 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) - Beep Boop Beep

First model I printed absolutely amazing. - 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) - R2 and KT - 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) - This is the droid you are looking for - 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) 3d model

R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue) - Quite possibly my favourite character from Star Wars. happy to finally print him out - 3d model

This model is restricted by licensing terms.

View license.

904 Likes2.5K DownloadsMarch 15, 2024

This model is restricted by licensing terms.

View license.

"Beep beep be deep boop!"

Find printing/assembly instructions on this model's designer post.

Come join the community on discord to chat about future designs, give feedback, and ask the group questions: BigBricks Discord

Our models are for personal use only. The sale or distribution of physical versions of this fan art is prohibited and done at the seller's own risk.

Categories:

,

Tags:

904 Likes2.5K DownloadsMarch 15, 2024

Related to R2-D2 (6 inch brick figure, NO MMU/AMS, NO supports, NO glue)

No related matches yet.

This model is restricted by licensing terms.

View license.

904 Likes2.5K DownloadsMarch 15, 2024

This model is restricted by licensing terms.

View license.