Here is the minecraft fully articulated toys 5 pack, this super fan art toy pack includes the most popular toys in my collection all are fully articulated, so every head, leg, arm, and limb moves. The pack includes both bosses in the game, the ender dragon, and the warden, and includes my favourite characters the tamed wolf of course, the Iron golem, and the zombie. 

*Check new updated joints now the wings hinge shouldn't snap off, and the connectors should be much easier to insert and remove*
Here is Ender dragon fully articulated, this amazing model comes ready too assemble and every limb neck and wings move. The full size looks amazing but you may want to size it down to save time, Don't size below 70%, I've tried and 70% is the smallest and that's what size the photos are taken. Instructions for assembly please check Photos and make sure to put left wing in left and right in right you'll know if you put the wings in wrong, because the bottom of the wings won't line up, or in the case of the legs the foot will be backwards. The pop in joints for the legs are tight so make sure to put those onto the body first so you don't damage anything else, when inserting the legs push firm and rotate around to wiggle it in, It will take a little bit of working to get them in but they'll be loose after the first time. There is a best spot to insert the wings it's about 45 degrees and don't stress if you break a hinge pieces off it'll will still work with 1-2. The neck and head just push in , make sure to use the longer side to push in as it has more area to grip the tail. The neck and tail, may be too tight after printing, if so just run a knife along the edge off the square to remove the edge, the attempt to insert it should be quite tight but not impossible. Print settings Speed 35ms, nozzle size 04.mm, Layer height 0.2mm, supports needed for wings, legs head and body, infill 15%.

Ender dragon fully articulated

ender dragon Body

Here is Iron golem Fully articulated, This awesome model is fully articulated, every leg, arm and neck move, I've also included some stencils to help you pain the model These aren't very helpful but if you have an air brush might be the perfect thing. Print setting No Supports needed, apart from the head, support type normal, Support placement touching build plate, Support density 6%, Nozzle size 0.4mm, Layer height 0.2mm, Print speed 40ms, Infill 15% Infill pattern Grid.

Iron golem fully articulated

iron golem All piece's laying

Here is Warden fully articulated, Every leg, arm, and head moves, so it's perfect as a toy, or as an art project. If your using PLA and want to paint it like I did, I used Acrylic paint, When applying the paint make sure to put it on thick as it won't want to stick at first if your really having trouble just use a bit of sand paper to ruff up the surface. Print setting, No supports needed apart from the head, Support type normal, Support placement touching the bed, Support density 6%, Nozzle size 0.4mm, layer height 0.2mm, Infill pattern grid, Infill density 15%, Print speed 40ms.

Warden fully articulated

Warden all Pieces laying.stl

Here is Tamed wolf articulated, All arms, legs, body, head, and tail move, The body and head are print in place and the joint just push in. No supports needed, to assemble the model print out the parts at 100% check to make sure the body and head move freely if they fuse together at layer height just use a knife or blade to slice the first layers apart, Then take the tail and rotate it on an angle at 30-45 degrees to insert into the hole at the back of the wolf. Push the tail horizontal to the hole making sure the push-in-joint is in line with the hole then lift or lower the tail to rotate the joint and apply pressure until the tail sits flush with the hole or you hear a click, Depending on the filament it may not make a click sound. Then to insert the legs, push the joint into the socket and rotate the leg back and forth until the limb sits flush or you hear a click. To differentiate the different limbs the front legs have a rounded top to give easier movement, the back legs have square tops and the tail has the smallest join socket. Print settings No supports, Nozzle size 0.4mm, Layer height 0.2mm, Infill pattern grid, Infill density 15%, Print speed 40ms,  

Tamed wolf articulated

Wolf tamed All Pieces laying.stl

Here is Zombie fully articulated, this super cool fan art toy is the perfect thing for anyone who loves minecraft, this amazing model is fully articulated every limb head and joint moves. The body and legs use's an awesome print in place design, the head and arm's just push into there socket's. To assemble the model simply print off the piece's then make sure to unclick the legs from the body if there to well stuck to the body then use the included zombie body legs extra space model. To make the legs move, run a blade or knife along the joint that connects to the body to the legs then slowly twist the legs until they move freely. Once the legs and arm's moving freely, simply push and twist the arms or head in to there dedicated sockets until they touch the body.  Print settings, No supports needed apart from the head, Support type normal, support placement touching build plate,(if your using bambu studio don't use supports auto, paint the supports onto the bottom of the neck socket) Nozzle size 0.4mm, Layer height 0.2mm, Print speed 50ms, Infill 15%, Infill pattern Grid, If your using Bambu studio increase the line width for sparse infill to 0.6mm, outer wall 0.6mm, Inner wall 0.6mm, everything else 0.4mm line width, 

Minecraft fully articulated 5 pack

Categories:

Tags:

Models in this collection

Ender dragon fully articulated

Iron golem fully articulated

Warden fully articulated

Tamed wolf articulated

Zombie fully articulated