This model is a multipart design, which means that you can print the parts in different colors to achieve a multicolor finish using just your single extruder printer.
Inside the file, you’re in for a treat:

Inside the file, you’ll find:
✅ Multipart model
✅ Completed model
✅ Pre-painted 3mf files for our beloved bambulab users! 🎨🖌️

🚨🚨🚨🚨🚨🚨

This model is for personal use only, if you want to sell physical prints of my designs, or you want to support me
**PLEASE SUBSCRIBE TO MY THANGS MEMBERSHIP PLAN**: https://thangs.com/designer/pressprint/paid-3d-models

If you want to explore my complete model library, please visit my portfolio and take a tour: https://youness.ezzarqtouni.com/


Baby Yoda Vase

baby yoda vase.stl

**free only for 48 hours**
This model is a multipart design, which means that you can print the parts in different colors to achieve a multicolor finish using just your single extruder printer.
Inside the file, you’re in for a treat:

Inside the file, you’ll find:
✅ Multipart model
✅ Completed model
✅ Pre-painted 3mf files for our beloved bambulab users! 🎨🖌️

🚨🚨🚨🚨🚨🚨

This model is for personal use only, if you want to sell physical prints of my designs, or you want to support me
**PLEASE SUBSCRIBE TO MY THANGS MEMBERSHIP PLAN**: https://thangs.com/designer/pressprint/paid-3d-models

If you want to explore my complete model library, please visit my portfolio and take a tour: https://youness.ezzarqtouni.com/


Tyranitar Controller Holder - Multipart

COMPLETE Tyranitar controller holdeer.stl

Lapras in multipart

This model is a multipart design, which means that you can print the parts in different colors to achieve a multicolor finish using just your single extruder printer.
Inside the file, you’re in for a treat:

Inside the file, you’ll find:
✅ Multipart model
✅ Completed model
✅ Pre-painted 3mf files for our beloved bambulab users! 🎨🖌️

🚨🚨🚨🚨🚨🚨

This model is for personal use only, if you want to sell physical prints of my designs, or you want to support me
PLEASE SUBSCRIBE TO MY THANGS MEMBERSHIP PLAN: https://thangs.com/designer/pressprint/paid-3d-models

If you want to explore my complete model library, please visit my portfolio and take a tour: https://youness.ezzarqtouni.com/


Lapras - Multipart

lapras .stl

Tyranitar Controller Holdeer 
using just your single extruder printer.
Inside the file, you’re in for a treat:

Inside the file, you’ll find:
✅ Multipart model
✅ Completed model
✅ Pre-painted 3mf files for our beloved bambulab users! 🎨🖌️

🚨🚨🚨🚨🚨🚨

This model is for personal use only, if you want to sell physical prints of my designs, or you want to support me
**PLEASE SUBSCRIBE TO MY THANGS MEMBERSHIP PLAN**: https://thangs.com/designer/pressprint/paid-3d-models

If you want to explore my complete model library, please visit my portfolio and take a tour: https://youness.ezzarqtouni.com/

Tyranitar Controller Holdeer - Multipart

cheep cheep controler holder 

cheep cheep controler holder.stl

It’s your friendly neighborhood 3D-printing Picasso 🎨

If you would like to **sell my models** please consider subscribing to my [Thangs membership](https://thangs.com/u/313927?plans=true)
**50% discount: THANGS1YEAR**

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Sometimes the terrifying things you see in your room at night aren't your imagination...

This scary little cutie is free until 6/13, after which it will only be available to members. Get it for free while you can!

This model is designed to print with a .4mm nozzle, .20 layer height, 10-15% infill, and 1-2 walls. A brim may be needed if your printer's adhesion isn't totally dialed in. You should be able to size the model up/down without any issue.

If you print this model, please upload pictures! :)

Soft and Cuddly - Free Until 6/13!

Soft and Cuddly 1.stl

This model is designed to print with a .4mm nozzle, .20 layer height, 10-15% infill, and 1-2 walls. A brim may be needed if your printer's adhesion isn't totally dialed in. You should be able to size the model up/down without any issue.

I included an STL and 3MF file for this model.

If you print this model, please upload pictures! :)

Minimalist Flower

Minimalist Flower.stl

This model is a member-exclusive and is bound by the terms of the membership you are subscribed to.

"Pikachu used 'Acquired Insight'! It's highly effective!" This Pikachu looks like he has seen a lot in his time and gained immeasurable experience.

This model is designed to print with a .4mm nozzle, .20 layer height, 10-15% infill, and 1-2 walls. A brim may be needed if your printer's adhesion isn't totally dialed in. You should be able to size the model up/down without any issue. NOTE: Unlike most of my models, this one is split into 2 parts. Please keep that in mind when preparing to print and display the model.

I included an STL and 3MF file for this model.

If you print this model, please upload pictures! :)

Insightful Pikachu

Insightful Pikachu.stl

This model is a member-exclusive and is bound by the terms of the membership you are subscribed to.

"We. Are. Venom." I absolutely love the way this one came out and I can't wait to hang it up!

This model is designed to print with a .4mm nozzle, .20 layer height, 10-15% infill, and 1-2 walls. A brim may be needed if your printer's adhesion isn't totally dialed in. You should be able to size the model up/down without any issue.

I included an STL and 3MF file for this model.

If you print this model, please upload pictures! :)

We Are Venom

We Are Venom.stl

This model is designed to print with a .4mm nozzle, .20 layer height, 1-2 walls, with "Detect Thin Lines" on. A brim may be needed if your printer's adhesion isn't totally dialed in. You should be able to size up this model without any issue, but you may not be able to size down much without a .2mm nozzle, as it may cause issues.

I included an STL and 3MF file for this model.

If you print this model, please upload pictures! :)

Low Poly Butterfly

Low Poly Butterfly.stl

I started 3D printing at the beginning of 2023 and now I'm ready to share my own models. Please let me know what you think!

It's fabric.

Print it, feel it, throw it at someone's face. Maybe even try to eat noodles with it, idc. Just do stuff with it.

Fabric - Print in place

Fabric.stl

Available for free for a limited time only!

**Update June5, 2024:**Added a stl files for single-material printers. Print Flounder_Plain and Eyes and assemble them separately after printing. **_Note_**: these specific files have yet to be tested, so if the eyes don't fit into the body very easily, let me know, and I can adjust the tolerance there and upload an updated version of the eyes so you don't have to reprint the body. While printing the eyes, feel free to pause the print to swap filaments and add personality to your flounder!

**Update June 1, 2024:** Adjusted tail to ensure stresses aren't focused on individual links while articulating.

Experience the realistic representation of marine life with our specially designed Articulating Flounder Fish 3D model on Thangs.com. Painstakingly crafted, the 3D model flaunts intricate articulation making it an ideal pick for hobbyists, educators, and sea life enthusiasts. Each segment of this flounder fish model moves fluidly, offering a realistic range of motion.

Immerse yourself in 3D printing by joining the amazing community of enthusiasts at Thangs.com, appreciating intricately detailed, high-quality models.

Two versions are available:

- Smooth Eyes: For those who wish to paint their own eyes the way they want.
- Indented detailed eyes: Irises, pupils, and reflections are formed in the model itself for ease of painting or for single-material printing.

**Specifications**:
- File Format: STL and 3MF files available.
- Dimensions: Largest dimension is 176mm. Not recommended to scale down
- Compatibility: Compatible with all major 3D printers.

Articulating Flounder Fish

Flounder v2.stl

Flounder_v1.3mf

Flounder_v2.3mf

Flounder_Plain.stl

Eyes.stl

Step into the enchanting world of 3D-designed articulable creatures with the Baby Dragon model by the talented Bearded Printer, available at Thangs.com.

This remarkable, intricately detailed 3D model serves as a fantastic addition to any dragon collector's trove. Primed for your creative inputs, this baby dragon can fit perfectly inside the dragon eggs designed by the same creator.

It allows 3D printing enthusiasts and dragon lovers alike to create their own mystical universe. Picturesque images of this Baby Dragon model capture its majestic allure and offer a preview into this captivating work of digital art.

Pore over this lifelike creature's charming loaded attributions in the vivid images provided. Unite this Baby Dragon with the rest of your collection and watch as your fantasy world comes to life through the magic of 3D design on Thangs.com.

Encourage your fascination for dragons and articulable models and unlock unlimited creativity with this 3D Baby Dragon model.

Don't have a spot for it as a decoration? Why not print the keychain version and attach it to a book bag?

Small Baby Dragon - Articulated Dragon

Generic Baby Dragon.stl

**Update May 18, 2024:** Added keychain model

Discover the amazing Baby Crystal Dragon with Egg 3D model at Thangs.com, an intricately designed masterpiece by the talented Bearded Printer. This unique piece, categorized under the "Articulated" section, features a baby dragon that cleverly fits inside an included egg. The model represents a perfect blend of fantasy and innovative design, making it a must-have for any 3D printing enthusiast. 

The Baby Crystal Dragon with Egg 3D model is defined by its breathtaking detailing and interactivity.

Experience the satisfaction of the egg snapping in place as you close it when you add magnets!

**Print Instructions:**
Optional Hardware:
- 6 - 6x3mm magnets for the egg

Supports: Not required. However, if you want the inside of the egg to look neat toward the top you might consider adding support there if you'd like.

**Assembly:**
When placing the magnets, ensure the magnets placed in a way where they attract each other when the tray is attached to the pot.

I've designed the magnets to be a “loose” press fit. Due to the wide variety of printers out there and the various states of tune the printers are in, I didn't want to make the tolerance too tight and make it difficult for those who haven't tuned their printers well enough. So, if your printer is well tuned, you may need to use glue to fasten the magnets.

Baby Crystal Dragon with Egg

Baby Crystal Dragon.stl

Baby Crystal Dragon_Keychain.stl

Explore this modern and aesthetically pleasing 3D planter model from thangs.com, a top-notch platform for original 3D designs by creative designers. This model titled 'Modern Planter 002' is a design by Bearded Printer, it offers a unique blend of gardening functionality and home décor. The 3D planter showcases elegance and innovation as it features a hidden drip tray that is effortlessly held in place with magnets.

If you're into 3D printing, this innovative planter is a lovely addition to your indoor gardening set. Please note that the model's magnets are designed to be a loose press fit and may require glue for fastening based on the printer tuning. Get your high-quality modern planter 3D model on thangs.com today and enhance your living space's aesthetic appeal.

**Required Hardware:**
6 x 3 mm magnets (6)

**Print Instructions:**
Height: 0.2mm
Supports: No

**Assembly**
When placing the magnets, ensure the magnets placed in a way where they attract each other when the tray is attached to the pot.

I've designed the magnets to be a “loose” press fit. Due to the wide variety of printers out there and the various states of tune the printers are in, I didn't want to make the tolerance too tight and make it difficult for those who haven't tuned their printers well enough. So, if your printer is well tuned, you may need to use glue to fasten the magnets.

Modern Planter 002

Top.stl

I've been doing the things and accomplishing the stuff as usual since the year when I realized they were cool things to do and neat stuff to accomplish

This design was made in collaboration with [Gazzaladra](https://thangs.com/designer/gazzaladra)


**A Log that unrolls into a chess set?**
 This log is a great decorative piece that doubles as a rolled-up chessboard. Remove both end caps to reveal the unique mushroom-themed chess pieces and wood-colored board. You can even use the end caps as coasters when you're playing your match.

The chess pieces are stored inside the chess board in two sets, colored to match the board. 

**Botany Test?**
The mushrooms and log are all photoscans of real plants! Below are the names of the plants so you can test your Botany skills

Log:       Pine Tree
Pawn:    Penny Bun
Rook:    Shiitake
Bishop:  King Trumpet (yes, we made the _King_ trumpet the bishop)
Knight:  Yellow Morel
Queen:  Fly Agaric
King:      Chanterelle

**Board Assembly**

- Print all 8 log pieces, the top and bottom in one color
- Print 32 of the squares in another color
- Cut up strings of 1.75mm (standard) filament that are slightly longer than the log and sharpen them on one end with a knife or cutter
- Connect the log pieces with the strings by inserting them with the pointy end
- Cut off the string ends
- Glue in all squares
- Glue in 6 magnets in the holes in log part 1 and 8 - make sure to have them face the right direction (optional but recommended)
- Each log segment is numbered 1 through 8 to allow for easy assembly.

**Print settings**
Material: PLA
Print direction: stls are rotated correctly
Nozzle size: 0,4 mm
Line width: 0,4 mm
Infill: 15%

Board
Layer height 0,2 mm
Support: One the log pieces 1-8 need support. Only  “touching build plate”, 20 degree “threshold angle”. (in Cura the number is calcuted 90-20 – so put 70 in “Support overhang angle”)

Chess pieces
Support: none
Layer height 0,08 mm
Build plate adhesion type: none


Filament Colors:
Log Brown: [OVV3D Black Walnut Wood PLA](https://a.co/d/jkr00hs)
Tile Wood Color: [OVV3D White Oak](https://a.co/d/fVtYAUk)
Top and Bottom Cap Accent Color: [OVV3D Yellow Teak Wood](https://a.co/d/aQqJkb3)
Optional Green Color Seen on Video: [Eryone Matte Olive Green](https://a.co/d/9ftba7b)

6x Magnets: [Small 5 mm x 3 mm Magnets](https://a.co/d/aGQe1Q0)



Forest Chess Set - Log and Mushroom Chess Board

Log Piece 5.stl

King.stl

Pawn.stl

Rooks_top.stl

Bishop.stl

Knight.stl

Queen_bottom.stl

Queen_top.stl

Rooks_bottom.stl

Chess Tile.stl

Forest Chess 3mf.3mf

The Bambookends! This is my most functional 3D printed plant.

It includes pens, highlighters, a post it note dispenser, and bookmarks. All the segments are screwed together so you can customize it however you want! This was made in collaboration with Elle Stvdio.

To make the pens, order the [Pilot G2 Gel ink Refills: ](https://www.amazon.com/dp/B0C2DZQ8V3?psc=1&ref=product_details). You'll just need to insert them into the Pen shoot, and give it a few strong taps on a table to get them seated.

To make the highlighers, order the [Sharpie brand pocket highlighters](https://www.amazon.com/SHARPIE-Pocket-Highlighters-Assorted-Highlighter/dp/B0040R4E2O/ref=sr_1_2?crid=1TV3VMLQUBF9D&dib=eyJ2IjoiMSJ9.M3NtdvBsPajgXJ7XWTxhI-LFLmWSMeH2LhTy8C46U2S0VNDZy59VyzX6wusdBL8JYKphbcbkcFcJo9ao8CKTyRLwoVYKB1C_KVI6U_mVo7eA1YD_szVQgJiK5X9RsQZiPjK3oeQ0H1jnDHBMh6kKfE5nWgqrICWNkEXxuhoOBuovCk98We7HHb7nlcfQJC3zAspyNvEHlcppmLm3YUflWe_Tnb_DulUpKVFYExkqpKMK8XMTE4EjAh-p5uZJ8NxHawywthBoMTLc1_Fb-cv_8YzLrYc2p74uCwypTsC0f5c._1KjL8uYkW7fwlfgBGrYa80OZ_lOi27nj6ZQ0Ihi-8k&dib_tag=se&keywords=pocket%2Bhighlighter%2Bsharpie&qid=1717188406&s=office-products&sprefix=pockey%2Bhightlighter%2Bsharpie%2Coffice-products%2C69&sr=1-2&th=1). Take it apart, and insert the tip into the highlighter shoot, and jam the ink sponge down into the shoots. Make sure you jam it down all the way, or the tip will dry out.

For the Post, it notes. Just use any accordion style post it notes. Like [these](https://www.amazon.com/Pop-up-Sticky-Bright-Sticking-Adhesive/dp/B0BHSY8L6C/ref=sr_1_1_sspa?crid=1CMDZUFQ0BWT8&dib=eyJ2IjoiMSJ9.eBcI4YClGEv0ummL4KSq7_IvVmJ5AhkxC6FDWA2A1Ez-p_LAbtyx5Zgna_pU9fPFQU6LbJElpv6m1oHFaN4CFWxn82amfl2W4enq0ebL6ePI4rMKiiBg9VvwPY4caJxkrrwivgQRQ1hPyQdDoCxvAh2mYTxfqD9zILsGsirg9nJVk3lWIXa3Ld5su5vJeJgyvjzwibLk2JKb4KZrd9VVV1dCYVSGLxUk98EwuVCVhiM.1CQNxnkSqu4Eq4sjanoYMXVi8EGO4SzdHTjC3KxwgpU&dib_tag=se&keywords=accordion+post+it+notes+3x3+refill&qid=1717188555&sprefix=accordia+post+it+n%2Caps%2C81&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1)

For print settings, open the 3mf file, and you will see all the settings, and orientation i recommend for printing! 

This model was a collaboration with Elle Stvdio! Check out his Thangs Page [Here](https://thangs.com/designer/elle%20STVDIO)

Bambookends - Bamboo Functional Plant with Pens, Highlighters, Post it note dispenser, and Bookmarks

Shoot Cap with Offshoot.stl

Highlighter Cap.stl

Desktop Hockey! 

This is my favorite game that i designed so far, considering I played it for 3 hours straight the day it was finished lol.

This pinball style hockey game is played elimination style. When you score on your opponent, you remove one of their defenders until they have none left. The player with defenders left at the end of the game wins!

For a longer version, play takeover style. Where you collect one of your opponents pieces every time you score, until someone captures all the pieces. This version gets very hectic!

Assembly instructions are in the video on this model page!

Even if you don't have a bambu printer, open the 3mf file. It will help you understand how to print the pieces and the best layout for printing them. You will need a multicolor printer if you want to print all the hockey lines. The multicolor net can be printed with a simple filament swap, or using a multicolor printer.

**Components you'll need to order.**  

1. Standard Rubberband (if you dont have them already)
2. [3/8" chrome steel ball bearings](https://www.amazon.com/dp/B007B2AG3G?psc=1&ref=product_details)

*Disclaimer: You will need a 254 mm print bed or larger for this!

Desktop Hockey

Flinger Shell.stl

This Cactus Coaster set is a super fun way to store your coaters. They are designed after the well-known bunny ear Cactus. Print 5 Coasters! Coaster D is an optional (smaller) coaster that can replace any of the top cactus pieces. The cactus shown in the images does not have this piece.

These look best when printed with a Multicolor printer, but will still look great printed in a single color.

These require a strong brim, and good supports to print. So make sure to use settings similar to the ones in the 3mf file.

Components you'll need to order.

1. The Magnets: [Small Round Magnets 5x3mm (Amazon)](https://www.amazon.com/gp/product/B0936M3WPK?ie=UTF8&th=1&linkCode=sl1&tag=forgecoreamaz-20&linkId=b8b1977cd3b76d0e756e47e95c1c1568&language=en_US&ref_=as_li_ss_tl) (same magnets as all other prints)

You'll need 16 magnets total per plant.

**Filament Colors:**
Green Color: [Eryone Matte Olive Green](https://www.amazon.com/dp/B08JFTQRWV?ref=product_details&th=1)
Yellow Color: [Polymaker Pastel Banana](https://www.amazon.com/gp/product/B08R3BMG6Z/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
Pot Color: [Geeetech Matte Orange](https://www.amazon.com/dp/B08JFTQRWV?ref=product_details&th=1)
Trunk / Dirt Color: [Duramic Matte Chocolate Brown](https://www.amazon.com/dp/B09MLL63ZB?psc=1&ref=product_details)


Cactus Coasters - Magnetic Cactus Coaster Set

Cactus Coasters 3mf.3mf

Cactus Peg.stl

A piggy bank that's actually a plant? This Figgy Bank is a super fun way to save your money. The coin vortex at the bottom makes it super fun to put coins into your bank.

Quarters and Nickels can be dropped from the top. Pennies and dimes are small and should be dropped from the root at the bottom, since they dont need as much speed, and will fall out of the trunk.

There are 3 Different leaf types, and 1 slotted leaf that goes at the top. 

Leaf Print Settings: Print the leaves standing straight up, 2 walls, 10% gyroid infill, no supports, use a raft with 0.02mm brim-object gap

**Filament Colors:**
Green Leaf Color: [Eryone Matte Olive Green](https://www.amazon.com/dp/B08JFTQRWV?ref=product_details&th=1)
Pot Color: [Geeetech Matte Orange](https://www.amazon.com/dp/B08JFTQRWV?ref=product_details&th=1)
Trunk / Dirt Color: [Duramic Matte Chocolate Brown](https://www.amazon.com/dp/B09MLL63ZB?psc=1&ref=product_details)



Assembly Video Coming Shortly..

Most recent

pressprint